Yaesu FT-51R Owner's Manual page 48

Monitoring
DTMF
Code
When a 3-digit DTMF code is received while
either Code Squelch or DTMF Paging is active, it
is automatically written into Code Memory C.
By selecting this Code Memory as described be-
low, you can view what DTMF code was last
heard, whether or not it opened your squelch.
Storing Code Memories
The first thing to do before using DTMF Pag-
ing or Code Squelch is to store your personal
3-digit code in Code Memory P:
Press (OM>+= to enable the code setting
mode appears at the display bot-
(
tom). The frequency display is replaced by a
Memory
Code number at the left, and the corre-
sponding 3-digit Code
fore) at the right.
to select Code Memory
DIAL
which is for your personal DTMF paging ID
code.
Use the numeric keys to enter the three digits
you want to use for your ID, then press
or the to return the display to the operat-
ing frequency. Your personal ID code is now
stored in Code Memory
I
Memory Codes of other individuals or groups in
Code Memories 1
stored, you might only need a few of them to call
your friends or a specific group. Likewise, you'll
probably only want your radio to respond to
if not used be-
pages directed to you (or maybe your group or
club's code). The following explains how to tem-
porarily inhibit unused Code Memories.
Page Code Inhibit
C E C
above, when storing Code Memories 1
have an opportunity to decide whether your
transceiver should respond to incoming paging
calls on a particular Memory Code.
Selected Code Memory
You can use the same procedure to store the
-
9.
Although up to nine Code Memories can be
During the Code Memory storage procedure
Code
-
9, you