Yaesu FT-51R Owner's Manual page 40

Lamp Illumination Settings
Momentarily pressing the
switch lights the LCD
L AMP
and keypad for 5 seconds. If
you want to toggle the lamp
on and off), press
pressing the switch.
LAMP
Scan Lamp
If you want the keypad
ily light after the receiver pauses on activity dur-
ing scanning or priority channel monitoring;
Press
and press
the lamp function on or off. Press the
save and exit.
Ringer Lamp
Similarly, you can have the lamp come on
while the ringer sounds during CTCSS Bell and
DTMF Paging (covered later);
Press
I
lamp function on/off. Press the
and exit.
before
LCD to momentar-
rotate the DIALM,,to, select
or to set
PTT
rotate theMEIeL for 5Et
to save
PTT
Lamp
DC
When inserting the FT-51R into the PA-10 Mo-
bile Power Adapter! the lamp turns on automat-
ically to illuminate the transceiver for easy
viewing at night. This automatic setting can be
changed to manual illumination:
Press (OM)+&/
then press
automatic illumination/off. Press the
save and exit.
to
Power-on Functions
Some default and custom transceiver set-
tings can be activated or changed by press-
ing certain button combinations while
turning the radio on. Refer to the table
shown on page 64 for a complete list includ-
ing reference pages.
rotate the for
or to toggle
PTT
to