Ars (Automatic Repeater Shift) - Yaesu FT-51R Owner's Manual

Automatic Repeater Shift
The ARS (Automatic Repeater Shift) feature
in the FT-51R activates repeater offset automat-
ically whenever you tune to the standard re-
peater subband. With this feature enabled, a
small or at the upper center of the dis-
play indicates that repeater shift is active (with-
out your having to activate repeater shift
manually), and closing the
(shifted) transmit frequency.
The subband range over which ARS feature
operates is determined by the version of your
transceiver, please refer to the chart shown be-
low.
Version A UHF
changes to the
-
ARS Repeater Subbands (version A )
145.1 145.5 146.0
145.6 145.8
440.0
The ARS function is enabled at the factory. To
disable it:
Press (OM)+
Now you can press
ARS function
right of the icon).
Press the switch or wait to the conclusion
PTT
of the message scroll to exit.
You can use the manual shift method
RPT MNO
at any time to select a new shift state,
whether ARS is activated or not. However, if you
change frequency with ARS activated, manual
repeater shift selections are canceled.
146.4 146.6 147.0 147.4 147.6
445.0
+
I
I
then rotate the
DIAL
appears.
or to toggle the
or (as reflected to the
148.0
450.0
so that