Yaesu FT-51R Owner's Manual page 64

Other DTMF Settings
The following are additional setting func-
tions of the DTMF keypad that you can custom-
ize to your own preference.
Paging
DTMF Code Speed
You can toggle the DTMF paging code speed.
The default tone duration (fast) is 50 ms (11 dig-
its per second). This can be changed to 100 msec.
duration (slow - 5.5 digits per second):
Press and rotate the
Press or
second per tone duration. Press the
save your entry and exit.
Note: Do not confuse DTMF Paging Code Speed
with DTMF Autodialer playback. Autodialer
playback speed is fixed and not selectable.
DTMF
When entering a string of DTMF digits, this
feature keeps the transmitter keyed for 2 sec-
onds after each key entry without having to keep
the depressed. This is convenient for re-
peater or personal autopatch operation when
to select
DIAL
to toggle or
PTT
TX "Hold"
-
the number you are dialing isn't stored in a
DTMF Auto-dialer memory.
To enable this feature, perform the following:
Press @+&and
toggle the feature on/off. Press the
your entry and exit.
Extended
Receive range can be extended by a power-on
sequence. Transmit range is limited to amateur
bands only (read the warning on the last page of
the manual). This feature may not be available on
to
all versions, in accordance with regulations in the
country the FT-51R is shipped to.
buttons, then turn the power on
again. To return to amateur band-only reception,
repeat the power-on sequence.
To enable automatic AM rece tionSE)elow 137
the DIA&JoBselect
or to select
reception (demodulation).
rotate the
DIAL
,
then use or
PTT
Range Reception
then press
to select
to
to s u m
rotate