Table of Contents
Advertisement
User Manual
Arctic Substation Gateway
IEC-104 gateway enabled
Value range
Note
7.2 Serial settings
The serial settings define the properties of physical serial communication
between the Arctic and an IEC-101 slave. The selection between
RS-232/422/485 is done with physical DIP switches located below the RS2
serial port.
Figure 27. Serial Settings
Speed (bps)
Table 19: IEC-101 serial communication speed (bps)
IEC-101 serial communication speed (bps)
Type
Units
Value range
Note
Data bits
Table 20: Number of data bits used on IEC-101 serial communication
Number of data bits used on IEC-101 serial communication
Type
Units
Value range
Note
Parity
Table 21: Parity method used on IEC-101 serial communication
Parity method used on IEC-101 serial communication
Type
Units
Firmware Version 2.4.x
No, Yes
Serial speed
Bits per second
1200, 2400, 4800, 9600, 19200, 38400, 57600
Serial data bits
Bits
5, 6, 7, 8
35
Serial data parity
Bits
Document Version 1
Advertisement
Table of Contents
