Table of Contents
Advertisement
User Manual
Arctic Substation Gateway
Figure 14. Ethernet WAN configuration
Connectivity Monitor settings are used when WAN redundancy functionality is
required. Monitor keeps checking the connection to the given remote host to
determine the network status. If the ping does not get an answer for a given
time window, it informs the WAN switch logic to try the secondary interface.
If the WAN redundancy is implemented by using two separated Ethernet
connections with different gateways, the Backup Gateway parameter needs
to be configured towards the correct backup gateway. Backup Gateway
parameter is not needed if WAN redundancy is implemented with wireless
connection.
See section
redundancy.
4.1.3 Mobile WAN
This screen configures the Mobile WAN interface on Arctic Substation
Gateway.
Firmware Version 2.4.x
WAN Failover
on page 25 for more details about WAN
24
Document Version 1
Advertisement
Table of Contents
