Table of Contents
Advertisement
User Manual
Arctic Substation Gateway
3. Enter the username and password and press Login button in the log-in
screen. The actual screen depends on the used web browser.
Note!
Default username is viola-adm and default password is violam2m. It is
recommended that the default password is changed before the product is
connected to a public network.
4. White texts on the blue background on the left are the primary navigation
texts and they are always visible on the screen. Individual screens may
have their own tabs which split the configuration fields on larger screens.
See the figure below.
Figure 10. Configuration menu
3.4 Configuring Ethernet LAN
1. Select Network->Ethernet LAN from the left menu.
2. Enter the preferred configuration to the configuration fields.
3. Press Submit button on the bottom to save the settings.
4. Select Tools->Reboot from the left menu and press Reboot button to
restart the unit
If the IP addresses are changed, the existing web browser connection
hangs up once the settings are applied, so open a new connection to the
new IP address (check the Ethernet cabling)
5. Connect to the Arctic Substation Gateway with a new IP address.
3.5 Configuring Mobile WAN
1. Select Network->Mobile WAN from the left menu.
2. Enter the preferred configuration to the configuration fields.
3. Press Submit button on the bottom to save the settings.
Firmware Version 2.4.x
21
Document Version 1
Advertisement
Table of Contents
