Table of Contents
Advertisement
User Manual
Arctic Substation Gateway
Figure 15. Mobile WAN configuration
To configure the mobile WAN, enable the connection by selecting
"Enable"="Yes" on the top of the page and enter PIN code if set, APN name
and authentication details if needed.
If Arctic Substation Gateway acts as a wireless router to Ethernet devices
and DNS is needed, enter DNS configuration as well. When ready, press the
Submit button on the bottom of the page to save settings.
Arctic Substation Gateway need to be restarted before the mobile WAN
configuration is active.
4.1.4 WAN Failover
WAN Failover screen configures the default gateway settings on the Arctic
Substation Gateway.
Firmware Version 2.4.x
25
Document Version 1
Advertisement
Table of Contents
