Table of Contents
Advertisement
User Manual
Arctic Substation Gateway
5 Serial Port Configuration
5.1 Configuring serial gateway
This section describes how to configure serial <-> Ethernet functionality.
Serial gateway feature enables data from the serial port attached device to be
routed to Ethernet and vice versa. Serial gateway processes the transmitted
data transparently and does not alter it any way except for buffering it for
transmission. Because of the transparent communication, any protocols can
be used in actual communication between nodes.
Figure 21. Serial gateway configuration screen
Serial gateway configuration depends on used protocols.
Both serial ports have their own configuration screens, located in
Applications->Serial Gateway (RS1) and Applications->Serial Gateway
(RS2).
Firmware Version 2.4.x
31
Document Version 1
Advertisement
Table of Contents
