Ethernet Lan; Network Monitor - Viola Systems Arctic Substation Gateway User Manual

User Manual
Arctic Substation Gateway
Figure 16. WAN Failover configuration
To enable any default routes, set "WAN Default Route"="Yes". Any route
settings are not effective if this parameter is not enabled.
Set "On Demand"="Yes" if the backup WAN interface to come up only
when primary interface goes down. Disable if both wireless and wired WAN
interfaces have to be up all the time.

4.1.5 Ethernet LAN

This screen configures the Ethernet LAN interface on Arctic Substation
Gateway.
Figure 17. Ethernet LAN Configuration
Ethernet LAN configuration is very simple. It configures the IP address for the
Ethernet LAN interface.

4.1.6 Network monitor

This screen configures the interface connectivity monitor on Arctic Substation
Gateway.
Firmware Version 2.4.x 26 Document Version 1