Table of Contents
Advertisement
Issue 21 - February 2000
To erase a number stored
Call Pick-Up (for External Line)
You can answer any incoming Calls on telephone that do not ring normally. When two or more
External Calls come in simultaneously, the lowest External line number will be Picked-Up first.
System Hold
A second External Call can be answered or a Call to another extension can be made while a Call is
on Hold. Any extension in the system can connect to a system held Call.
Putting a Call on Hold
Retrieving a held Call
© Panasonic UK Ltd.
1. Press the ON/OFF Key.
•
Listen for the Internal dial tone from the speaker.
•
The ON/OFF indicator will light up.
2. Press the MEMORY Key
3. Dial the address code of the number to be erased (00 ~ 89).
4. Press the HOLD Key.
5. Press the ON/OFF Key.
•
The ON/OFF indicator will go out.
1. Lift the Handset
2. Dial 8 8 to Pick-Up the ringing Call.
1. Tell the other party that you are placing them on Hold.
2. Press the Hold Key.
•
The indicator for the line will flash Green.
•
The line indicator for this line on other telephones will now
flash Red.
•
Your Call is now on Hold
1. Press the Line Key of the held Call.
•
Calls held on your telephone will flash Green.
•
Calls held by other telephones will flash Red.
- 14 -
A-Series (UK)
E & OE
Advertisement
Table of Contents
