Issue 21 - February 2000
System Speed Dials (common numbers)
With System Speed Dials you use two digit address codes instead of dialling the whole telephone
number. You can use the address codes for System Speed Dials on all Key telephones. Up to 90
address codes for System Speed Dials from 00 to 89, can be stored from extension 10.
Telephone numbers can be stored even while the other telephones are being used. Telephone
numbers of up to 16 digits including !, # and PAUSE (Redial key) can be stored. If a new
telephone number is stored, the old telephone number is erased and the new contents are set.
To Store a number (from extension 10 only)
To make a Call
© Panasonic UK Ltd.
1. Press the ON/OFF Key.
Listen for the Internal dial tone form the speaker.
The ON/OFF indicator will light up.
2. Press the MEMORY Key.
4. Press the required One-Touch Key.
5. Press the HOLD Key.
6. Press the ON/OFF Key.
The ON/OFF indicator will go out.
1. Press any Line Key available.
Listen for External dial tone.
The line indicator will light up green.
2. Press the MEMORY Key
3. Dial the address code of the number desired (00 ~ 89).
The telephone number stored in the address will be dialled.
4. Lift the Handset and speak when the other party answers.
- 13 -
E & OE