Dialling A Stored Number From The Direct Dial Memory - Panasonic KX-TS620EX Operating Instructions Manual

To erase a stored number
1
Press the required Direct Dial
button ({ M1 }, { M2 } or { M3 }).
2
Press { }.
• To stop erasing, press {
( No key).
3
Press { OK } (Yes key).
• A long beep sounds, the
information is erased, then
"Memory Empty" is displayed.
• To exit the programming mode, press
or wait for 60 seconds.
• When using the Dial Lock (p. 42) or Call
Restriction feature (p. 43), you cannot
erase a phone number in the Direct Dial
memory ({ M1 }, { M2 } or { M3 }).
• If a pause is required for dialling, press
} where needed. If required, you can
{
also store { R } in a phone number.
Pressing { } or { R } counts as one digit
(p. 38, 40).
Dialling a Stored Number
from the Direct Dial
memory
1
3
}
2
OR
{ ? }
1
2
• When you press the Direct Dial buttons
continuously, confirm that the first dialling
out have complete, then press the next
button.
• You can dial numbers stored in the Direct
Dial memory ({ M1 }, { M2 } or { M3 }) even if
the Dial Lock (p. 42) or Call Restriction
feature (p. 43) is set.
Direct Dial (M1, M2, M3)
Lift the handset or press {s/W}.
Press the required Direct Dial
button ({ M1 }, { M2 } or { M3 }).
• The stored number is displayed
and dialled.
Press the required Direct Dial
button ({ M1 }, { M2 } or { M3 }).
• The stored number is displayed.
Lift the handset or press {s/W}.
37