Table of Contents
Advertisement
Issue 21 - February 2000
If the Called extension is busy
Internal Calls
Tone Call / Voice Call
A Tone Call is used to Call another internal extension.
During a Tone Call you can change over to a Voice Call by dialling 1.
System programming can be used to reverse this sequence, so you can change a Voice Call to a
Tone Call.
To change a Tone Call to a Voice Call
•
NOTE: Single Line Telephones are only allowed to change between Tone and Voice Calls
once.
Operator Call
By pressing 0 (Operator Call key), you can Call extension 10.
This feature is convenient for Calling the operator by a single button operation.
Answering with Handset
© Panasonic UK Ltd.
2. Press the Line Key of the held Call.
•
You are reconnected to the Call.
•
Calls held on your telephone will flash Green.
1. Lift the Handset.
•
Listen for Internal dial tone.
•
On-Hook dialling is also available.
2. Dial the desired extension number.
•
The telephone number stored will be dialled.
3. Dial 1 during the Internal Tone ringing.
•
Your Tone Call changes to a Voice Call.
4. Start speaking.
•
Your voice will now be heard through the speaker of the
Called party's telephone
1. Lift the Handset.
•
Listen for Internal dial tone.
2. Dial 0
When answering a Voice or Tone Call simply lift the handset.
If the telephone has a speakerphone, simply press the ON/OFF
key.
- 16 -
A-Series (UK)
E & OE
Advertisement
Table of Contents
