Download  Print this page

Adding An Internal Party To An External Call; External Paging; Loud Ringing Bell (lrb); Doorphone - Panasonic VA-309UK Operating Instructions Manual

A series key telephone system.
Hide thumbs

Advertisement

Issue 21 - February 2000

Adding an internal party to an external Call

External Paging

You can page through an external paging amplifier and external adapter (if connected).
External paging is also heard from the speakers of the telephones belonging to the Paging Zone-3
if system programming has been set.

Loud Ringing Bell (LRB)

The incoming ring at a specified extension can be made to sound through the external paging line.
This is useful in a noisy factory and wide-open spaces to inform people of incoming Calls.
Switching paging mode to LRB mode for external paging output can be operated from any
extension telephone by pressing 78 and On-Hook.
NOTE: Although during paging, this mode change cannot be accepted-

Doorphone

Up to two Doorphones can be installed and used with this system.
The Calling Tones of each are:
If there is a Doorphone Call while you are talking with the other Doorphone, the Calling Tone will
be heard only by you.

To answer Doorphone Call using contact Keyphone

© Panasonic UK Ltd.
1. Tell the party that you are about to place them on Hold.
2. Press the HOLD Key.
Internal Dial Tone is heard.
The INT Key will flash, your Call is now held.
3. Place Call to another extension.
4. When answered, announce that you wish to have a 3 party
conference.
5. Press CONF Key to enable the 3 party conference.
The INT light will be lit.
4. Lift the Handset.
Listen for Internal dial tone.
5. Dial #03 for Zone 3.
The INT indicator will light up.
6. Make your announcement into the mouthpiece of the Handset.
Doorphone A
Doorphone B
Lift the Handset and speak.
Chime
Tremolo Tone.
- 33 -
A-Series (UK)
E & OE

Advertisement

Table of Contents

   Also See for Panasonic VA-309UK

   Related Manuals for Panasonic VA-309UK

This manual is also suitable for:

Va-616ukVa-824ukVa-1232uk

Comments to this Manuals

Symbols: 0
Latest comments: