Dialling A Stored Number From The Direct Dial Memory - Panasonic KX-TS620FX Operating Instructions Manual

To erase a stored number
1
Press the required Direct Dial
button ({M1}, {M2} or {M3}).
2
Press {ERASE}.
• To stop erasing, press {
(No key).
3
Press {OK} (Yes key).
• A long beep sounds, the
information is erased, then
"Memory Empty" is displayed.
• To exit the programming mode, press
{EXIT} or wait for 60 seconds.
• When using the Dial Lock (p. 42) or Call
Restriction feature (p. 43), you cannot
erase a phone number in the Direct Dial
memory ({M1}, {M2} or {M3}).
• If a pause is required for dialling, press
{PAUSE} where needed. If required, you
can also store {FLASH} in a phone
number. Pressing {PAUSE} or {FLASH}
counts as one digit (p. 38, 40).
Dialling a Stored Number
from the Direct Dial Memory
1
3
}
2
OR
1
2
• When you press the Direct Dial buttons
continuously, confirm that the first dialling
out have complete, then press the next
button.
• You can dial numbers stored in the Direct
Dial memory ({M1}
the Dial Lock (p. 42) or Call Restriction
feature (p. 43) is set.
Direct Dial (M1, M2, M3)
Lift the handset or press
{SP-PHONE/HEADSET}.
Press the required Direct Dial
button ({M1}, {M2} or {M3}).
• The stored number is displayed
and dialled.
Press the required Direct Dial
button ({M1}, {M2} or {M3}).
• The stored number is displayed.
Lift the handset or press
{SP-PHONE/HEADSET}.
,
{M2}
or
{M3}) even if
37