Lcr Important Note; Least Cost Routing (Lcr); Least Cost Routing Override - Panasonic VA-309UK Operating Instructions Manual

A series key telephone system
Hide thumbs Also See for VA-309UK:
Table of Contents

Advertisement

Issue 21 - February 2000

LCR IMPORTANT NOTE

The LCR software is incorporated in a chip (ROM Version 2) and by simply replacing the existing
ROM with the new one, the system will have the facility of LCR. (Mercury Access)
By pre-programming STD codes where Mercury service is available, the system automatically
diverts Calls either to Mercury or British Telecom.
When using the LCR facility, the following will apply.
1. When existing ROM is replaced, system memory is re-set to default. Whole system re-
programming is therefore required after LCR ROM has been inserted.
2. When LCR is used, 90 system memories are reduced to 70 (00 - 69).
3. The system will select a Mercury line if available, but it will not automatically divert Calls back
to BT again, if the Mercury lines are busy.
4. For security reasons, ensure that your personal Mercury authorisation code is not disclosed to
any other party. Should you suspect that this number has been disclosed, this should be
reported immediately to Mercury on 0800-424194.

Least Cost Routing (LCR)

The system can elect to route Calls via Mercury.
System programming is required for this feature.
Only available from Version 2.0 ROM.
Notes:
You should start dialling the number within 5 seconds of pressing the Line Key.
When using this feature, only 70 addresses (00 ~ 69) are available to System Speed Dials.

Least Cost Routing Override

You can override the automatic LCR feature and specify to use the BT service.
System programming is required for this feature.
Only available from Version 2.0 ROM.
© Panasonic UK Ltd.
1. Lift the Handset or press the ON/OFF Key
You will hear internal Dial Tone.
2. Press any available Line Key.
3. Dial the number required
4. Speak when answered
1. Lift the Handset or press the ON/OFF Key
You will hear internal Dial Tone.
2. Press any available Line Key.
3. Dial 121 (route selection Override code)
4. Dial the number required
The Call will be routed via BT
- 21 -
A-Series (UK)
E & OE

Advertisement

Table of Contents
loading

This manual is also suitable for:

Va-616ukVa-824ukVa-1232ukA series

Table of Contents