Wireless Xdp - Panasonic KX-TDE100 Pc Programming Manual

6.1 [4-1-1] Wired Extension—Extension Settings

Wireless XDP

Specifies the extension number of the PS with which Wireless XDP Parallel Mode is established. To enable
Wireless XDP Parallel Mode, the PS must be turned off once and then turned on after assigning this setting.
When changing the port type of an extension port in
Property - Extension Port screen, the
Value Range
Max. 4 digits (consisting of 0–9)
Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Guide References
1.25.5 Wireless XDP Parallel Mode
Ring Pattern Table
Specifies the Ring Tone Pattern Table to be used by the extension.
Value Range
1–8
Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
4.15 [2-8-1] Ring Tone Patterns—Call from CO
4.16 [2-8-2] Ring Tone Patterns—Call from Doorphone
4.17 [2-8-3] Ring Tone Patterns—Call from Others
Feature Guide References
1.1.3.2 Ring Tone Pattern Selection
Programmed Mailbox No.
Specifies the mailbox number of the extension's mailbox for Voice Processing Systems (VPS) with DTMF
Integration.
Value Range
Max. 16 digits (consisting of 0–9, *, and #)
656 PC Programming Manual
DPT Type—Type on the 3.21 [1-1] Slot—Port
Wireless XDP setting must be deleted first.