Panasonic KX-TDE100 Pc Programming Manual page 739

Feature Guide References
1.5.5.2 Line Preference—Outgoing
Incoming Preferred Line
Selects the line on which an incoming call is answered after going off-hook.
Note that even if a specific PDN button is selected here, a call ringing at any PDN button on the extension will
be answered when going off-hook.
Value Range
No Line: No line is selected. Select a line by pressing the desired Line Access button to answer a call.
Ringing Line: The longest ringing call is selected.
PDN: The call arriving at any PDN button is selected.
F-1–F-12: The call arriving at a flexible button (F-1–F-12) is selected. A flexible button customised as a
Single-CO, Group-CO, Loop-CO, or ICD Group button must be selected.
Maintenance Console Location
6.10 [4-2-1] Portable Station—Extension Settings
Programming Manual References
6.13 [4-2-3] Portable Station—Flexible Button
Feature Guide References
1.4.1.2 Line Preference—Incoming
Call Waiting Tone Type
Selects the type of Call Waiting tone sent to the busy extension.
Value Range
CW Tone 1, CW Tone 2
Maintenance Console Location
6.10 [4-2-1] Portable Station—Extension Settings
Programming Manual References
None
Feature Guide References
1.8.4.2 Call Waiting Tone
LCS Recording Mode
Specifies whether to continue or stop recording the message in the PS's mailbox when the PS user answers
a call that was being monitored.
6.10 [4-2-1] Portable Station—Extension Settings
PC Programming Manual 739