Panasonic KX-TDE100 Pc Programming Manual page 25

Connection Settings for RS-232C
Setting
Port
Baud Rate (bps)
Connection Settings for Modem
Setting
Dial Number
Dial Type
Comment
Port
Baud Rate (bps)
Modem Initialise
Connection Settings for LAN
Setting
IP Address
2.1.1 Starting Maintenance Console and Software Modes
Values
COMx
2400, 4800, 9600, 19200, 38400,
57600, 115200
Values
1-9, 0, *, #, -, "," [comma], T, P,
W
Auto(Tone), Auto(Pulse),
Manual
Max. 40 characters
COMx
1200, 2400, 4800, 9600, 19200,
38400
–
Values
1.0.0.0–223.255.255.255
Explanation
Specify the number of the COM
port assigned to the PC's
RS-232C interface. Only
available COM ports are
displayed.
Specify the speed of data
transmission.
Explanation
Enter the telephone number to
be dialled to access the PBX.
T: Converts the Dial Type from
Pulse to Tone.
"," [comma], P, W: Inserts a
pause.
Specify the outgoing dialling
method.
If Manual is chosen, dialling
must be done with a connected
telephone.
Enter a comment to identify the
set of values.
Specify the number of the COM
port assigned to the PC's modem
interface.
Only available COM ports will be
displayed.
Specify the speed of data
transmission.
Enter the modem initialise
command, and click Initialise to
send the command to the
modem.
For more details, refer to your
modem's instruction manual.
Explanation
Specify the IP address of the PBX
on the LAN. Enter the same IP
address that was input in IP
Address of 3.4 [1-1] Slot—Card
Property - IPCMPR.
PC Programming Manual 25