Panasonic KX-TDE100 Pc Programming Manual page 483

Programming Manual References
3.30 [1-1] Slot—Port Property - BRI Port—Supplementary Service—
CNIR, CONR, CF (Rerouting), CT, CCBS, AOC-D, AOC-E, 3PTY
3.32 [1-1] Slot—Port Property - PRI Port—Supplementary Service—
CNIR, CONR, CF (Rerouting), CT, CCBS, AOC-D, AOC-E, E911, 3PTY
Feature Guide References
1.21.1.2 Calling/Connected Line Identification Presentation (CLIP/COLP)
1.30.4.2 Calling/Connected Line Identification Presentation (CLIP/COLP) and Calling/Connected Name
Identification Presentation (CNIP/CONP)—by QSIG
Switch CLIP of CO Line / Extension
Specifies the feature number used to send either the CLIP number of the trunk in use (subscriber's number)
or the extension to the network.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.9 [2-6-1] Numbering Plan—Main
Programming Manual References
3.30 [1-1] Slot—Port Property - BRI Port—ISDN CO—
3.32 [1-1] Slot—Port Property - PRI Port—CO Setting—
6.1 [4-1-1] Wired Extension—Extension Settings—ISDN CLIP—
6.10 [4-2-1] Portable Station—Extension Settings—ISDN CLIP—
Feature Guide References
1.21.1.2 Calling/Connected Line Identification Presentation (CLIP/COLP)
MCID
Specifies the feature number used to ask the telephone company to trace a malicious call. This feature can
be used during a call or while hearing a reorder tone after the caller hangs up.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.9 [2-6-1] Numbering Plan—Main
Programming Manual References
None
4.9 [2-6-1] Numbering Plan—Main
COLP, CLIR, COLR, CNIP, CONP,
COLP, CLIR, COLR, CNIP, CONP,
Subscriber Number
Subscriber Number
CLIP ID
CLIP ID
PC Programming Manual 483