Parallel Telephone Ringing; Dpt Type—Type - Panasonic KX-TDE100 Pc Programming Manual

Parallel Telephone Ringing

Specifies whether the sub telephone (SLT) rings at the same time as the main telephone (DPT) for an incoming
call. This setting is only available when Port Type on this screen is set to S-Hybrid.
Value Range
Yes, No
Maintenance Console Location
3.21 [1-1] Slot—Port Property - Extension Port
Programming Manual References
None
Feature Guide References
1.11.9 Parallelled Telephone
DPT Type—Type
Selects the port type.
To change the port type of an extension port, follow the steps below:
1.
Set the status of the extension port to "OUS".
2.
Change the port type of the extension port, then click Apply.
3.
Set the status of the extension port to "INS".
When changing the port type of an extension port for which
6.1 [4-1-1] Wired Extension—Extension Settings screen, the
first.
When changing the type of a port for which one or more SDN buttons are set (except when changing
between PC Console and Telephone), all SDN buttons customised for that device will be deleted. When
you attempt to apply the new settings, a warning message is displayed showing the slot and port number
for which SDN buttons will be deleted. If you do not wish to delete SDN buttons for this port, click
Cancel.
Value Range
Normal: For connecting a DPT
DSS: For connecting a DSS Console (A maximum of 8 [with the KX-TDE100/KX-TDE200] or 64 [with the
KX-TDE600] DSS Consoles can be connected to the PBX.)
VM (DPT): For connecting a Panasonic VPS through DPT Integration
PC Console: For connecting a PC Console (A maximum of 8 PC Consoles can be connected to the PBX.)
Maintenance Console Location
3.21 [1-1] Slot—Port Property - Extension Port
Programming Manual References
3.22 [1-1] Slot—Port Property - Extension Port—Connection Command
3.21 [1-1] Slot—Port Property - Extension Port
Wireless XDP has been set on the
Wireless XDP setting must be deleted
PC Programming Manual 213