Panasonic KX-TDE100 Pc Programming Manual page 865

Feature Guide References
1.30.5.1 Network Direct Station Selection (NDSS)
Network Data Transmission for Centralised Operator Feature—Data
Transmission ISDN->VoIP
Selects whether to re-send BLF data received from an ISDN port through any VoIP ports that are set to transmit
BLF data.
Value Range
Disable, Enable
Maintenance Console Location
11.2 [9-2] Network Data Transmission
Programming Manual References
11.3 [9-3] Network Operator (VoIP)—
Feature Guide References
1.30.5.1 Network Direct Station Selection (NDSS)
Network Data Transmission for Centralised Operator Feature—Data
Transmission Counter
Specifies the maximum number of "hops", or transmissions between two PBXs, before a packet of BLF data
is discarded.
Value Range
1–63
Maintenance Console Location
11.2 [9-2] Network Data Transmission
Programming Manual References
None
Feature Guide References
1.30.5.1 Network Direct Station Selection (NDSS)
Network Data Transmission for Centralised Operator Feature—Data
Broadcasting Interval Timer
Specifies the frequency of BLF data transmission. The PBX will send data over the network periodically
according to the interval specified here.
IP-GW Card Slot No. to notify BLF data to Network Operator
11.2 [9-2] Network Data Transmission
PC Programming Manual 865