User Program Edit Mode - Landice pro trainer Owner's Manual

User Program Edit Mode

The Pro Trainer Treadmill can store up to 2 individual User-Defined Programs. These programs will be retained even if the
unit is unplugged.
User-Defined Programs look and run exactly like Built-In Programs. The primary difference between Built-In and User-Defined
Programs is customization. Unlike the Built-In Programs, User-Defined Programs allow you to manually edit 20 individual
segments.
SELECT A PROGRAM
Press PROGRAMS at any time during a workout to display Programs options. To scroll through the programs you may
use the arrow keys or continue to press the Programs button. To select a user program, press ENTER while program is
displaying User Program 1 or 2 then press ENTER to edit.
EDIT THE SEGMENTS
After pressing enter, use the arrow keys to select program time from 5 - 99 minutes. Once the desired time is selected press
ENTER. The EDIT MODE requires one speed and/or incline for each segment. For each of the 20 segments, speed and
incline windows will flash. Change the speed and incline by using the " + " and " - " keys under each window. Continue to
program subsequent segments by using the Arrow Keys to move from segment to segment.
EXITING EDIT MODE
Once you have completed editing all 20 segments in your User Defined Program, you can begin your program by pressing
START. If you attempt to advance the cursor past the 20th segment, you will be prompted with "PRESS START TO BEGIN".
You can also exit Edit Mode by pressing Programs at any time.
10