Appendix C: Troubleshooting; Problems Indicated In The Top Status Lcd - Kodak DCS Pro SLR/n User Manual

Appendix C: Troubleshooting

Problems Indicated in the Top Status LCD

Top Status LCD
fEE blinks
fEE blinks
appears
blinks
—
HI appears
April 29, 2004
In addition to the issues described in this section, the following Web page
provides answers to many of your questions:
http://www.kodak.com/go/DCS.
Viewfinder
fEE blinks Lens is not set to its minimum
aperture.
P blinks Attached Speedlight is not set at TTL
Auto Flash in P mode.
— Battery is low.
— Battery needs to be charged.
blinks Autofocus is not possible.
HI appears Overexposure warning (subject is
too bright).
Cause
Set lens to minimum aperture.
Set the Speedlight flash mode to
TTL, or set the Exposure mode to S,
A, or M.
Have fresh battery ready.
Remove the battery and charge it.
Focus manually.
In P mode, use an ND filter.
In S mode, select a faster shutter
speed.
In A mode, select a smaller
aperture (larger f-number).
(If the warning indications remain
after trying the remedy in S or A
mode, use an ND filter.)
Remedy
C-1