Iso; Setting Iso Using The Image Lcd; Setting Iso Using Camera Controls - Kodak DCS Pro SLR/n User Manual

Configuring your Camera

ISO

Setting ISO using the
Image LCD
Setting ISO using Camera
Controls
5-24
ISO determines the sensitivity of the camera system to light. Increasing or
decreasing the ISO increases or decreases sensitivity.
You can change ISO settings in 1/3 stop increments using the
Main-Command dial.
You can set ISO using the Image LCD (see below) or using camera controls
(see page 5-24).
1. Choose ISO from the Capture menu, then choose the desired setting.
2. Press the OK button.
Shortcut:
• You can also access this function using the Digital Status LCD shortcut
(see page 2-16).
1. Set the Exposure Mode dial to ISO.
2. Rotate the Main-Command dial to choose the desired setting.
April 29, 2004