Kodak Mini Shot - Instant Camera Manual

Also See for Mini Shot:

User manual (2 pages)

Table of Contents

Contents

1 Smartphone App Installation
2 Bluetooth Connection
3 NFC Connect
4 Before Start
5 Take a Photo
6 Power, Shutter and Active Status
7 Control Panel
8 Menu
9 Note
10 Troubleshooting
11 FCC (Federal Communications Commission)
12 Documents / Resources
- 12.1 References
- 12.2 Download manual

Kodak Mini Shot - Instant Camera Manual

Smartphone App Installation

Go to Play Store or App Store in smartphone.
Search "Kodak Mini Shot"
Install it to your smartphone.

iPhone

Android

Bluetooth Connection

Turn on Bluetooth in your smartphone.
Turn on Mini Shot.
Go to Bluetooth setting in your smartphone and select "KODAK Mini-XXXX" ('XXXX' are 4 digits combination of numbers and letters.)

NFC Connect

*NFC Support Android device only.

Turn NFC on in your smart phone.
Turn on Mini Shot.
Tap the phone on the top of printer. Google Play Store app installation page will show up.
Install the app into your smartphone from the store.

Before Start

Mini Shot has built-in battery. Charge Mini Shot before using it.
How to change cartridge.

Take a Photo

Turn on Mini Shot by pressing power button.
Press shutter button to take the photo after positioning the subject in LCD screen.

Power, Shutter and Active Status

	Shutter Button: Take a Photo
	Power ON: White / Power OFF(2Sec): Off / Printing: White flickering F.W Upgrade: Pink flickering / No Cartrige, Error: Red Flickering Waiting, Cooling: White
	Charge Charging: Red / Charging Complete: Green
	Connecting: Blue Blink / Bluetooth Complete: Green

Control Panel

	Menu: You can select Borders, Filters, Flash or Language
	Print: Print image on LCD.
	Arrow Button: You can go to left or right in the menu.
	OK: Confirm the setting or selected menu.

Border: You can select border of printed image.
Filter: You can select filters when you take the photo
Flash: You can set Flash Auto or Off.
Language: You can set language

* Taken photos are deleted when the camera is powered OFF.

Note

* Photo Paper will go in and out 4 times (Yellow, Magenta, Cyan, Overcoating). Do not touch the paper during printing process for best image quality
* Do not pull paper out by force during printing.
* Do not place an object in front of the paper exit slot.
* Use the latest application for best print quality. Check the latest app version from Google Play Store and Apple App Store.
* Printer has built-in battery. Charge the printer before using.
shock hazard * Handle with care during charging to prevent electric shock.
* Do not disassemble or deform.
* Avoid too high or low temperature or humidity.
* If NFC tag is not read, check its position on the Mini Shot and smartphone. Then try again.
* The higher resolution the image has, the higher quality the printed photo has. Recommended image size is 1280*2448 pixel.
* Operating Temperature: 0~40℃ (32-104°F)

Troubleshooting

Symptom	Cause / Solution
Paper Jam	Power off and Power On again. Paper will be automatically ejected If not, please contact customer service.
Image quality is not good	Print quality could be less if your photo source has low resolution.
Image quality is not good	Over 1280 x 2448 pixel is recommended for best image quality.
Mini Shot is not responding	Press Reset button with sharp tool like pin.

FCC (Federal Communications Commission)

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modiifications to the equipment not expressly approved by the party responsible for compliance could void user's authority to operate the equipment.