Deleting Setups From Camera Memory; Selecting A User Setup; Editing An Existing Setup - Kodak DCS Pro SLR/n User Manual

Deleting Setups from
Camera Memory

Selecting a User Setup

Editing an Existing Setup

April 29, 2004
You can save up to ten setups in camera memory. If there are already ten
setups saved, you must delete one or more setups before new setups can be
saved or loaded.
1. Choose User Setups from the Tools menu, then choose Saved.
2. Choose Delete, then choose the setup to be deleted.
3. Press the OK button.
4. Press the OK button again to respond to the confirmation screen.
You can select setups that are in camera memory. Once selected, the
camera is configured according to that setup.
1. Choose User Setups from the Tools menu, then choose the desired
setup.
2. Press the OK button.
It takes about two seconds for the camera to be configured to the new
setup.
1. Select a User Setup.
2. Change camera settings, as needed.
3. Create a new User Setup (see
4. When the name entry screen appears, it shows the current setup
name. Highlight
The setup is changed and saved to memory. (You can save it to a card,
if needed.)
Configuring your Camera
page 5-13).
and press the OK button.
5-15