Powering Your Camera Using The Power Module; Powering Your Camera Using A Battery; Charging Batteries - Kodak DCS Pro SLR/n User Manual

Powering Your Camera

Powering Your Camera using the Power Module

Powering Your Camera using a Battery

Charging Batteries

Power LED
3-2
1. Insert the power module in the battery slot on the camera and turn the
latch clockwise.
latch
2. Insert the power module cable into the power module and into the
port on the charger/adapter.
3. Plug the charger/adapter into an electrical outlet.
The Power LED is green when the charger/adapter is powered.
NOTE: You cannot charge batteries while the power module cable is
connected.
1. Remove the power module cable from the charger/adapter if it is
connected.
2. Plug the charger/adapter into an electrical outlet.
The Power LED is green when the charger/adapter is powered.
April 29, 2004