When You Change Lenses - Kodak DCS Pro SLR/n User Manual

Configuring your Camera

When you Change Lenses

5-30
If you have selected a lens from the user list and you later change the lens,
you should select the new lens before shooting. If you capture an image
and the lens does not match your selection, the camera will attempt to
automatically select the new lens. The camera will ask you for help if it is
uncertain which lens you are using. One of the following events will occur:
• If there is one possible match in the user list or the master list, that lens
is automatically selected.
• If there are two or more possible matches in the user list or the master
list, the list of possible matches appears.
• If there are no possible matches in the user list or the master list, the
camera switches to Auto.
NOTE: If you use the wrong lens in Basic mode, the Auto method will be
used.
With two or more matches:
1. Press the OK button to dismiss the screen.
2. Select a lens and press the OK button.
April 29, 2004