Click Balance; Using The Current Image For Click Balance - Kodak DCS Pro SLR/n User Manual

Click Balance

Using the Current Image for
Click Balance
April 29, 2004
Click balance takes RGB values from the current image or from previously
saved or loaded settings and applies them to subsequently captured
images.
1. Select an image (see
2. Choose White Balance from the Capture menu, choose Click Balance
then highlight Image and press the OK button.
The selected image appears.
3. Press any side of the Four-way switch to move the eyedropper over a
neutral (gray) area of the image.
4. Press the OK button.
The pixel values in the area under the eyedropper are sampled.
Controlling Exposure
page 11-7).
7-3