Using The Gps Feature - Kodak DCS Pro SLR/n User Manual

Using the GPS Feature

April 29, 2004
Serial Data Collection and Global Positioning System
1. Connect the appropriate end of the GPS serial cable to the serial port
on your camera.
2. Connect the other end of the cable to the GPS unit.
3. On the GPS unit, set the output format to NMEA.
4. On the GPS unit, check the baud rate.
5. On the camera, set the baud rate (see
GPS unit.
6. Choose GPS from the Tools menu.
GPS information appears.
7. Press the OK button.
GPS information is written to the header of images captured while the
GPS unit is connected.
page 15-4) to that shown on the
15-5