Page 3 KODAK PROFESSIONAL DCS Pro SLR/n Digital Camera User’s Guide P/N 6B8983_EN...
Page 4 Eastman Kodak Company 343 State Street Rochester, New York, 14650 © Eastman Kodak Company, 2004 Kodak and Kodak Professional are trademarks of Eastman Kodak Company.
Page 5: Table Of Contents
Table of Contents 1 Important Information System Requirements for Your Computer ... 1-1 Warranty Registration for your Camera... 1-1 Warnings... 1-2 Safety Warnings... 1-2 Operational Warnings ... 1-2 Important Safeguards and Precautions ... 1-3 Electromagnetic Emissions... 1-6 VCCI ... 1-6 2 About Your Camera Nomenclature...
Page 6 Table of Contents LCDs...2-10 Top Status LCD...2-10 Image LCD ...2-10 Turning On the Image LCD ...2-11 Display Activation...2-12 Turning Off the Image LCD...2-12 Digital Status LCD...2-13 Using the Menus ...2-14 Navigating Through the Menus ...2-15 Using the Digital Status Button and Digital Status LCD to Highlight Menu Options...2-16 Using the HotKey Button to Highlight Menu Options ...2-17 Main-Command and Sub-Command Dials...2-18 Lens...2-18...
Page 7 Disposing of Batteries ... 3-6 4 The Basics Basic Mode ... 4-1 Setting the User Mode ... 4-2 Setting Advanced Mode ... 4-2 Setting Basic Mode ... 4-2 Accessing Functions Using the Basic Menu ... 4-3 Digital Status LCD... 4-3 Using the Digital Status LCD to Highlight Menu Options ...
Page 8 Table of Contents Using Job Tracker...5-9 Saving a Job Tracker File to a Card...5-9 Loading a Job Tracker File from a Card...5-10 Loading a Job Tracker File from Camera Memory ...5-11 Selecting a Language...5-11 Resetting Defaults ...5-12 User Setups...5-13 Creating a New User Setup...5-13 Saved Setups ...5-14 Loading a Setup from a Card...5-14 Saving a Setup to a Card...5-14...
Page 9 Maintaining the User List... 5-31 Adding Lenses from the Master List ... 5-31 Removing Lenses from the User List ... 5-33 Saving a List ... 5-34 Loading a List ... 5-34 Defining New Lenses ... 5-35 Defining New Fixed Lenses ... 5-35 Defining New Zoom Lenses ...
Page 10 Table of Contents Exposure Bias ...6-15 Look ...6-16 Noise Reduction...6-16 Sharpening Level...6-17 7 Controlling Exposure White Balance...7-1 Preset White Balance...7-2 Click Balance ...7-3 Using the Current Image for Click Balance...7-3 Displaying the Saved Settings Menu...7-4 Using a Saved Setting ...7-5 Saving a Setting on the Camera ...7-6 Loading Settings from a Card ...7-7 Deleting Settings ...7-7...
Page 11 Transferring Images... 9-4 Editing Images ... 9-4 KODAK PROFESSIONAL DCS Photo Desk ... 9-5 KODAK PROFESSIONAL Extended Range Imaging File Format Module... 9-5 Capture Workflow when the Camera is Connected to a Computer... 9-5 Connecting to a Computer and Power Supply... 9-6 Starting the Capture Software ...
Page 12 Table of Contents Flash Shooting Distance Range for the Built-in Speedlight ...10-5 Usable Lenses with the Built-in Speedlight...10-6 Ready-Light...10-7 Hot Shoe...10-8 PC Sync Terminal...10-8 Flash Sync Modes ...10-9 Flash Sync Modes for Optional Speedlights...10-11 Flash Exposure Compensation ...10-12 Using Optional Speedlights ...10-13 Notes for Using an Optional Speedlight...10-15 11 Working with Images on the Camera Reviewing Images ...11-1...
Page 13 Tagging Images ... 11-12 Recording Sound Files... 11-13 12 Using the Video Output Port Connecting ... 12-1 Enabling/Disabling External Video... 12-2 13 Connecting to Your Computer Advantages to an IEEE 1394 Connection... 13-1 Advantages to a Card Reader ... 13-1 Connecting Your Camera to the Computer...
Page 14 Appendix C: Troubleshooting Problems Indicated in the Top Status LCD ...C-1 Other Problems ...C-3 Appendix D: Warranty KODAK PROFESSI0NAL DCS Pro SLR/n Digital Camera... D-1 Warranty Repair Coverage ... D-1 Limitations... D-2 Outside the United States ... D-3 Warranty is Not Transferable ... D-3 How to Obtain Service ...
Page 15: Important Information
System Requirements for Your Computer Warranty Registration for your Camera April 29, 2004 Thank you for purchasing your KODAK PROFESSIONAL DCS Pro SLR/n Digital Camera. This portable camera system, which combines technologies of Eastman Kodak Company and NIKON Corporation, allows you to capture and store high-resolution, high-quality digital images.
Page 16: Warnings
• Use only the KODAK PROFESSIONAL DCS Pro DC Power Module included with your camera or available from Kodak as an accessory. Do not plug other adapters into the camera. • The KODAK PROFESSIONAL DCS Pro DC Power Module is for indoor use only.
Page 17: Important Safeguards And Precautions
Water and Moisture—Do not use the camera in dripping or splashing water or near salt spray, and do not immerse your camera in water or other liquids. Do not use the KODAK PROFESSIONAL DCS Pro Charger/AC Adapter near water—for example, near a sink or in a wet room or basement.
Page 18 Lightning—For added protection for your camera during a lightning storm, or any time when you will leave your camera unattended for long periods of time, unplug the KODAK PROFESSIONAL DCS Pro Charger / AC Adapter from the power outlet and disconnect the camera from the computer.
Page 19 April 29, 2004 Damage Requiring Service—Unplug your camera from the wall outlet and computer, and refer all servicing to the manufacturer under the following conditions: • If liquid has been spilled or if objects have fallen into your camera. • If your camera has been exposed to heavy rain or water. (While it is designed to tolerate a reasonable amount of moisture, your camera is not waterproof.) •...
Page 20: Electromagnetic Emissions
Important Information Electromagnetic Emissions VCCI This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 21: About Your Camera
About Your Camera Nomenclature Camera Front Self Timer / AF-Assist Illuminator / Red-eye Reduction lamp Shutter Release button Sub-Command dial Depth of Field Preview button Vertical Shutter release April 29, 2004 Exposure Mode dial PC Sync terminal Lens Release button Focus Mode selector Remote Release accessory port...
Page 22: Camera Back
About Your Camera Camera Back Exposure Mode dial Flash Sync Mode button Auto Exposure Bracketing button Image LCD Menu button Nav+ button HotKey button Digital Status button Digital Status LCD Camera Top Flash Lock Release button Drive Mode selector lock release Camera Strap eyelet Exposure Mode dial Drive Mode selector...
Page 23: Camera Bottom
Camera Bottom Camera strap eyelet Left Side Serial port Battery slot April 29, 2004 About Your Camera Tripod mount Battery slot Name plate Coin cell battery slot Video Output port IEEE 1394 port...
Page 24: Open Media Door
About Your Camera Open Media Door Turning the Camera On and Off Connect your camera to a power source (see • Turn the Power Switch On or Off. CF Eject button CF Card slot Card Busy LED SD/MMC card slot page 3-1) before turning it April 29, 2004...
Page 25: Viewfinder And Focus Screen
Auto Exposure Lock indicator Shutter Speed Aperture April 29, 2004 NOTE: Do not attempt to replace the Focus screen. Return the camera to an authorized KODAK service center. About Your Camera Flash Ready light Exposure Compensation value / Flash Exposure Compensation value...
Page 26: Digital Buttons
About Your Camera Digital Buttons Menu button Nav+ button HotKey button Digital Status button Four-way Switch NOTE: Use the buttons at the left of the Image LCD with the Four-way switch. Use the buttons at the right of the Image LCD without the Four-way switch.
Page 27: Locking And Unlocking The Four-Way Switch
Locking and Unlocking the Four-way Switch OK Button Cancel Button April 29, 2004 The Four-way switch does not work if the Four-way switch lock is on. There may be occasions where you want it locked to prevent changing certain settings. •...
Page 28: Menu Button
About Your Camera Menu Button Nav+ Button HotKey Button • If the Image LCD is off, turns it on and displays a menu (last-accessed menu option highlighted) • Displays a menu when the Image LCD is in Image mode (last-accessed menu option is highlighted) •...
Page 29: Digital Status Button
Digital Status Button Delete Button Tag/Record Button April 29, 2004 The Digital Status button (used with the Digital Status LCD) provides a shortcut to capture-critical menu options on the Image LCD. (See page 2-16.) • Highlights the last-used function on the Digital Status LCD and highlights its associated menu option on the Image LCD •...
Page 30: Lcds
About Your Camera LCDs Top Status LCD Shutter speed / Exposure Compensation value Flash Exposure Compensation Exposure Compensation Flexible Program Flash Sync Mode Image LCD 2-10 Bracketing bar graphs Using the Image LCD you can: • Conveniently evaluate and review images in the camera NOTE: Occasionally there are a few pixels in the LCD that are either brighter or darker than the scene depicted.
Page 31: Turning On The Image Lcd
Turning On the Image LCD April 29, 2004 All of the buttons listed below turn on the Image LCD if it is off. Some of the buttons provide shortcuts to specific functions on the Image LCD. Browse images—OK button, Nav+ button Navigate menus—Menu button, Digital Status button (shortcut), HotKey button (shortcut) Digital...
Page 32: Display Activation
About Your Camera Display Activation Turning Off the Image 2-12 If you use your right eye when capturing images, your nose may accidentally press one of the buttons on the left side of the camera (Nav+, Menu, Digital Status, or HotKey). If you use your left eye when capturing images, your nose may accidentally press the OK button on the right side of the camera.
Page 33: Digital Status Lcd
Digital Status LCD April 29, 2004 The Digital Status LCD provides the following information: Status information Capture-related information - interactive shortcuts to associated menu options on the Image LCD Review-related information Helpful messages Brief descriptions of highlighted menu options Brief procedural instructions Capture-related status information: When the Image LCD is turned off, or when you lightly press the Shutter Release button, the Digital Status LCD displays capture-related information and provides shortcuts to associated...
Page 34: Using The Menus
About Your Camera Using the Menus 2-14 Your camera provides a variety of digital functions. You can access these functions through the tabbed menus on the Image LCD. The tabbed menus are available in Advanced mode. In Basic mode (see single menu with no tabs.
Page 35: Navigating Through The Menus
Navigating Through the Menus April 29, 2004 1. Press and hold the Menu button and press the right or left side of the Four-way switch to highlight the tab containing the desired set of functions. 2. Release the Menu button. 3.
Page 36: Using The Digital Status Button And Digital Status Lcd To Highlight Menu Options
About Your Camera Using the Digital Status Button and Digital Status LCD to Highlight Menu Options 2-16 The Digital Status button, the Digital Status LCD, and the Four-way switch provide a shortcut to menu options on the Image LCD. 1. Press and hold the Digital Status button to highlight the last-used function on the Digital Status LCD, and highlight its associated menu option on the Image LCD.
Page 37: Using The Hotkey Button To Highlight Menu Options
Using the HotKey Button to Highlight Menu Options April 29, 2004 The HotKey button provides a shortcut to frequently used (user-definable) digital functions. You can change the HotKey settings if you like (see page 5-8). To access a function using the HotKey button: 1.
Page 38: Main-Command And Sub-Command Dials
About Your Camera Main-Command and Sub-Command Dials Main-Command dial Sub-Command dial Lens Mounting the Lens 2-18 The Main- and Sub-Command dials are used alone or in combination with other buttons to select or set various functions or modes. 1. Turn off the camera. April 29, 2004...
Page 39: Removing The Lens
Removing the Lens Imager April 29, 2004 2. Mount the lens to the camera body. 3. Set the lens to its minimum aperture and lock. • Press and hold the Lens Release button and turn the lens clockwise. The Imager records light when you capture an image. Your camera has an approximately 14 million pixel imager with an ISO range of 160 to 1600 (RAW files) or 160 to 800 (JPEG files).
Page 40: Viewfinder Diopter
About Your Camera Viewfinder Diopter LCD Illuminator 2-20 You can compensate for nearsightedness or farsightedness and see more clearly through the viewfinder by adjusting the viewfinder diopter within a continuous range (–1.8 to +0.8). 1. Remove the rubber eyecup. 2. Slide the Diopter Adjustment lever while looking through the viewfinder until the focus brackets or other viewfinder displays appear sharp.
Page 41: Depth Of Field Preview Button
Depth of Field Preview Button Imager Plane Indicator April 29, 2004 The depth of field is the zone of acceptable focus in front of and behind the subject. • Press the Depth of Field Preview button to confirm the depth of field through the viewfinder.
Page 42: Hot Shoe
About Your Camera Hot Shoe PC Sync Terminal Remote Release Accessory Port Hot shoe 2-22 The Hot Shoe allows direct mounting of a wide range of NIKON-dedicated electronic Speedlights. CAUTION Do not use Speedlights from other manufacturers since higher voltages and/or extra hot shoe contacts can damage your camera.
Page 43: Camera Straps
Camera Straps Attaching the Neck Strap Attaching the Hand Strap April 29, 2004 A neck strap and a hand strap are included with your camera. You can attach either or both. • Thread the ends of the neck strap through the camera strap eyelets. Pull firmly on the strap to make sure it is held securely by the buckles.
Page 45: Powering Your Camera
The following items are included with your camera: • KODAK PROFESSIONAL DCS Pro Battery (battery) • KODAK PROFESSIONAL DCS Pro DC Power Module (power module) • KODAK PROFESSIONAL DCS Pro Charger / AC Adapter (charger/adapter) • CR 2032 coin cell battery (available at most battery retailers)
Page 46: Powering Your Camera Using The Power Module
Powering Your Camera Powering Your Camera using the Power Module latch Powering Your Camera using a Battery Charging Batteries Power LED 1. Insert the power module in the battery slot on the camera and turn the latch clockwise. 2. Insert the power module cable into the power module and into the port on the charger/adapter.
Page 47 Charging LED April 29, 2004 3. Insert a battery in the battery slot on the charger/adapter. The appearance of the Charging LED varies, depending on the status of the charging operation: Color Action green one blink green two blinks green three blinks green constant...
Page 48: Inserting/Removing Batteries
Powering Your Camera Inserting/Removing Batteries • To insert, slide a charged battery in the battery slot on the camera and turn the latch clockwise. • To remove, lift the latch, turn the latch counterclockwise and slide the battery out. latch April 29, 2004...
Page 49: Checking Battery Status
To maximize battery performance, turn the camera off or remove the battery when not in use. For more information on battery conservation, go to http://www.kodak.com/go/DCS. • Use of a telephoto or wide angle fisheye lens and constant auto-focusing • Using the on-camera pop-up flash •...
Page 50: Cr 2032 Coin Cell
2. Slide the carrier into the carrier slot on the camera. This digital camera contains small amounts of lead in the circuit board. Disposal of lead may be regulated due to environmental considerations.
Page 51: The Basics
The Basics Basic Mode April 29, 2004 This chapter describes the functions available in Basic mode and provides basic instructions for composing, focusing, and capturing images. Your camera has two modes for accessing digital functions: Basic and Advanced modes. Using Basic mode you can change settings on some digital functions.
Page 52: Setting The User Mode
The Basics Setting the User Mode Setting Advanced Mode Setting Basic Mode 1. If the Image LCD is off, press the Menu button to turn it on. If the Image LCD is on and images are displayed, press the Menu button.
Page 53: Accessing Functions Using The Basic Menu
Accessing Functions Using the Basic Menu Digital Status LCD April 29, 2004 1. Press the top or bottom of the Four-way switch to highlight a menu option. If a pop-up menu appears, press the right side of the Four-way switch to enable the menu, then press the top or bottom of the Four-way switch to highlight a menu option.
Page 54: Using The Digital Status Lcd To Highlight Menu Options
The Basics Using the Digital Status LCD to Highlight Menu Options Setting ISO The Digital Status LCD and the Digital Status button provide a shortcut to some menu options. 1. Press and hold the Digital Status button to highlight the last-used function on the Digital Status LCD and to highlight the associated menu option on the Image LCD.
Page 55: White Balance
White Balance April 29, 2004 White Balance adjusts an image to match the type of lighting used when capturing images. When you specify a White Balance option, that setting is applied to subsequently captured images. White Balance options include Auto, Daylight, Tungsten, Fluorescent, and Flash.
Page 56: Setting Raw Resolution
The Basics Setting Raw Resolution There are three resolutions available for Raw files: 13.5 MP—Full-resolution Raw images (4500 x 3000) 6.0 MP—Half-resolution Raw images (3000 x 2000) 3.4 MP—Quarter-resolution Raw images (2250 x 1500) 1. Choose Raw Resolution from the Capture menu, then highlight a resolution.
Page 57: Setting Jpeg Resolution
Setting JPEG Resolution April 29, 2004 The four resolutions for JPEG files are: 13.5 MP—Full-resolution JPEG images (4500 x 3000) 6.0 MP—Half-resolution JPEG images (3000 x 2000) 3.4 MP—Quarter-resolution JPEG images (2250 x 1500) 0.8 MP—0.8 resolution JPEG images (1125 x 750) 1.
Page 58: Formatting A Card
The Basics Formatting a Card You should format a card if it was formatted incorrectly or if the data on the card becomes corrupted. If you have used a card for several sessions (for example, two or three dozen), you may want to format it on the camera you will be using so that the full capacity of the card is available.
Page 59: Changing The Display Contrast
Changing the Display Contrast Brightness Contrast April 29, 2004 You can change the contrast and lighten or darken the images displayed on the Image LCD. NOTE: Changing the contrast does not affect the stored images, only the view of the images on the Image LCD. 1.
Page 60: Turning The Overexposure Indicator On And Off
The Basics Turning the Overexposure Indicator On and Off 4-10 You can indicate areas of overexposure in images in Single or Multiple Image Display modes. 1. Choose Overexposure Indicator from the Basic menu, then highlight Highlight Off to turn the Overexposure Indicator off. 2.
Page 61: Firmware
Firmware is the software program that runs within your camera and controls its operation. If a new firmware version becomes available, you can download it from the Kodak Web site (see firmware in your camera. NOTE: You must register your camera (see download firmware.
Page 62: Updating Firmware
The Basics Updating Firmware 4-12 1. On your computer, go to http://www.kodak.com/go/dcssoftware follow the instructions. 2. Insert a CF Card into the computer’s card reader. 3. Using the computer, copy the firmware file to the card’s root directory. 4. Insert the card straight into your camera.
Page 63: Setting The Time/Date
Setting the Time/Date Using the HotKey button to Highlight Menu Options April 29, 2004 A time and date stamp is associated with each image file. A CR 2032 coin cell battery maintains the time and date for approximately one to two years. If this battery loses its charge, you must replace the battery (see page 3-6) and reset the time and date.
Page 64: Composing, Focusing, And Capturing Images
The Basics Composing, Focusing, and Capturing Images 4-14 2. Press and hold the HotKey button, and press the right or left side of the Four-way switch to highlight the menu option associated with the next or previous HotKey position. 3. Release the HotKey button to enable the menu option. 1.
Page 65: Configuring Your Camera
Camera Image LCD April 29, 2004 This chapter describes features and methods for configuring your KODAK PROFESSIONAL DCS Pro SLR/n Digital Camera. You can set separate battery save times for the camera and the Image LCD. To conserve battery power, your camera goes into a low-power mode if not used for a specified amount of time.
Page 66: Custom Settings
Configuring your Camera Custom Settings Custom Settings Table You can change Custom Settings using the Custom Settings menu. See page 5-2 for a complete list of custom settings. 1. Choose the desired setting from the Custom menu, then highlight an option.
Page 67 April 29, 2004 Custom Description Setting Grid Lines Displays grid lines in viewfinder Off (default) Focus Area Light Displays auto-focus bracket lights in viewfinder Focus Area Wrap Successive rotation of focus area selection Focus Area Lock Locks or unlocks the focus area Unlock Soft Press AE-L Auto Exposure Lock with Shutter Release button...
Page 68 Configuring your Camera Custom Description Setting Command Dial Assignment of functions to digital command dials S = shutter speed. A = Aperture Meter Off Time Time delay for auto meter switch Self Timer Time Set duration for Self Timer Top LCD Light Status LCDs illuminate when you press any function button AF Assist...
Page 69: Firmware
You can: • View information about your current firmware version • Download new firmware versions from the Kodak Web site and update the firmware in your camera (see • Enable optional firmware features (see NOTE: You must register your camera (see download firmware.
Page 70: Downloading Firmware To Your Computer
Computer Updating Firmware on your Camera • On your computer, go to http://www.kodak.com/go/dcssoftware follow the instructions. Once you download the firmware to your computer, you can copy it to a memory card and update the firmware on your camera.
Page 71: Firmware Features
Firmware Features Folder and File Naming April 29, 2004 A few specialized features are built into the firmware and are only available with a key. To enable a firmware feature on your camera you must first purchase a kit containing instructions and a certificate number (one kit for each camera where firmware features are to be enabled).
Page 72: Setting Hotkeys
Configuring your Camera Setting HotKeys HotKeys provide shortcuts to frequently used digital functions. Your camera has built-in settings for five HotKeys. You can clear settings or reset the HotKeys to different digital functions, according to your own workflow. NOTE: The Digital Status button (see specific capture-critical functions.
Page 73: Using Job Tracker
On the computer: 1. Place a CF card in the computer’s card reader. 2. Using KODAK PROFESSIONAL DCS Photo Desk Software, save the .IPT file to the card. Alternatively, you can save the file to your hard drive and copy it to a card later.
Page 74: Loading A Job Tracker File From A Card
Configuring your Camera Loading a Job Tracker File from a Card 5-10 1. Insert the card in the camera. 2. Choose Job Tracker from the Tools menu then highlight Load. 3. Choose Load from Card. If there are two cards in the camera, highlight a card. 4.
Page 75: Loading A Job Tracker File From Camera Memory
Loading a Job Tracker File from Camera Memory Selecting a Language April 29, 2004 1. Choose Job Tracker from the Tools menu then highlight Load. 2. Choose Load from Memory then highlight a file. 3. Press the OK button. The file becomes the active job tracker file. You can select the language that appears in the Image LCD and Digital Status LCD (English, Japanese, French, Italian, German, Spanish, Simplified Chinese, Portuguese, or Korean).
Page 76: Resetting Defaults
Configuring your Camera Resetting Defaults 5-12 You can restore digital settings and camera settings to the factory defaults. 1. Choose Default Reset from the Tools menu, then highlight Digital Settings, Camera Settings, or Both. 2. Press the OK button. 3. Press the OK button to accept the change and dismiss the confirmation screen.
Page 77: User Setups
You can transfer setups from one KODAK PROFESSIONAL DCS Pro SLR/n Digital Camera (DCS Pro SLR/n camera) to another (see 1. If there are ten setups saved in camera memory, delete one or more to make room for the new setup (see 2.
Page 78: Saved Setups
• Delete setups from camera memory memory. This setup might have been saved on your camera or on a different DCS Pro SLR/n camera. 1. If there are ten setups saved in camera memory, delete one or more to make room for the new setup (see 2.
Page 79: Deleting Setups From Camera Memory
Deleting Setups from Camera Memory Selecting a User Setup Editing an Existing Setup April 29, 2004 You can save up to ten setups in camera memory. If there are already ten setups saved, you must delete one or more setups before new setups can be saved or loaded.
Page 80: Using Setups On More Than One Camera
5-16 Most settings are transferred when you load User Setups that have been saved to a card using a different DCS Pro SLR/n camera. The exceptions are Click Balance and Job Tracker settings, but you can work around these exceptions.
Page 81: Time And Date
Time and Date April 29, 2004 A time and date stamp is associated with each image file. Inside your camera, a CR 2032 Coin Cell battery (see the time and date for one to two years. If this battery loses its charge, you must reset the time and date.
Page 82: Setting The User Mode
Configuring your Camera Setting the User Mode 5-18 Your camera has two user modes: Advanced mode—provides access to all digital functions Basic mode—provides access to some digital functions (see page 4-1). • If the camera is in Advanced mode, choose User Mode from the Tools menu, then choose Basic.
Page 83: Using The Vertical Release
Using the Vertical Release April 29, 2004 You can lock or unlock the camera’s vertical shutter release or set it to Auto. Auto—The vertical shutter release works when the camera is in portrait orientation (turned 90°counterclockwise). Unlock—The vertical shutter release works when the camera is in any orientation.
Page 84: Intervalometer
Configuring your Camera Intervalometer 5-20 The Intervalometer automatically captures a sequence of images at specified intervals over a specified time period. You might use the Intervalometer to capture a flower bud opening or for unattended surveillance. The Intervalometer is disabled automatically after the specified time period, even if the specified number of images have not been captured.
Page 85: Changing Intervalometer Settings
Changing Intervalometer Settings Option Menu Enable Count Interval Delay April 29, 2004 Procedure 1. Choose Intervalometer from the Tools menu, choose Enable, then highlight Yes or No. 2. Press the OK button. 1. Choose Intervalometer from the Tools menu, then highlight Count. The current count appears with the first digit highlighted.
Page 86: Long Exposure
Configuring your Camera Long Exposure 5-22 You can enable or disable a long exposure feature on your camera. When enabled, this feature reduces noise in long exposures. The choices are: Off—If you capture an image using long exposure while this feature is Off, a message suggests that you enable it.
Page 87: Two-Button Reset
Two-Button Reset April 29, 2004 Two-Button Reset resets some settings to their original factory values. • Press and hold seconds. The Top Status LCD turns off momentarily and the following functions are reset to their original settings. Exposure mode is set to P, S, or M. Function Focus area Flexible Program...
Page 88: Iso
Configuring your Camera Setting ISO using the Image LCD Setting ISO using Camera Controls 5-24 ISO determines the sensitivity of the camera system to light. Increasing or decreasing the ISO increases or decreases sensitivity. You can change ISO settings in 1/3 stop increments using the Main-Command dial.
Page 89: Drive Mode
Drive Mode Drive Mode Selector Lock release Single frame shooting Drive Mode selector Continuous shooting Locking Exposure Settings Drive Mode Selector Lock release Exposure Settings Lock Drive Mode selector April 29, 2004 The following Drive modes are available: Single-frame shooting —Fully pressing the Shutter Release button takes one picture.
Page 90: Using The Self Timer
Configuring your Camera Using the Self Timer Drive Mode Selector Lock release Self Timer Drive Mode selector Self Timer LED Cancelling the Self Timer 5-26 Use the Self Timer when you want to be in a photograph. Use a tripod or place the camera on a stable surface before using the Self Timer.
Page 91: Lens Optimization
Lens Optimization Overview April 29, 2004 Some lenses produce a color shift in the corners of images. Your camera has a feature that corrects this color shift to create a more uniform image. There are three methods for controlling the strength of this correction. Method one: Auto—(see page determines the correction strength for each image based on analysis of the...
Page 92: Selecting The Method Of Lens Optimization
Configuring your Camera Selecting the Method of Lens Optimization Auto 5-28 There are three methods for optimizing your lens: 1. Choose Lens Optimization from the Capture menu. 2. Choose Auto. 3. Press the OK button. NOTE: Auto is the factory default. If you reset defaults (see the camera resets to the Auto method.
Page 93: Manual
Manual Select a Lens from the User List April 29, 2004 1. Choose Lens Optimization from the Capture menu, then choose Manual. 2. Press the right side of the Four-way switch to display the edit boxes. 3. Press the right or left side of the Four-way switch to highlight a box. Press the top or bottom of the Four-way switch to change a value.
Page 94: When You Change Lenses
Configuring your Camera When you Change Lenses 5-30 If you have selected a lens from the user list and you later change the lens, you should select the new lens before shooting. If you capture an image and the lens does not match your selection, the camera will attempt to automatically select the new lens.
Page 95: Maintaining The User List
Maintaining the User List Adding Lenses from the Master List April 29, 2004 The camera maintains a master list of lenses. You can create your own user list of frequently used lenses. You can do the following with the user list: •...
Page 96 Configuring your Camera 3. Choose the lens that is mounted on your camera. NOTE: If your lens does not appear in the master list, add a new fixed (see page 5-35), or a new zoom lens (see page 5-36). 4. Press the OK button. The lens is moved from the master list to the user list.
Page 97: Removing Lenses From The User List
Removing Lenses from the User List April 29, 2004 Use this option to move a lens from the user list to the master list. 1. Choose Lens Optimization from the Capture menu, choose Setup, then choose Remove Lens. 2. Select the lens to be removed. 3.
Page 98: Saving A List
If your camera needs repair and the original list cannot be saved, your backup copy can be loaded. If you use more than one KODAK PROFESSIONAL DCS Pro SLR/n Digital Camera, you can save time by creating the user list of commonly used lenses on one camera, then loading it into the others.
Page 99: Defining New Lenses
Defining New Lenses Defining New Fixed Lenses April 29, 2004 If you use a lens that is not in the camera’s master list, you can define a new lens and add it to the user list. You can: • Define a new fixed lens (see page •...
Page 100: Defining New Zoom Lenses
Configuring your Camera Defining New Zoom Lenses 5-36 1. Mount the appropriate lens on the camera. 2. Choose Lens Optimization from the Capture menu, choose Setup, then choose New Zoom Lens. 3. Focus at infinity, set the lens to its shortest focal length, then capture one image.
Page 101: Deleting Defined Lenses
Deleting Defined Lenses April 29, 2004 Use this option to delete a lens that you defined. 1. Choose Lens Optimization from the Capture menu, choose Setup, then choose Delete Lens. A list of user-defined lenses appears. 2. Select the lens to delete. 3.
Page 102: Editing The Lens Name
Configuring your Camera Editing the Lens Name 5-38 NOTE: This feature is available for lenses that you defined. It is not available for lenses that you added from the master list. In addition to assigning strength values to lenses in the user list, you can add information to help you identify the lens.
Page 103 April 29, 2004 3. Enter text. a. To enter a character, press the right or left side of the Four-way switch to highlight the character, then press the OK button. b. To change a character, highlight > or <, then press the OK button to move to the next or previous character in the folder name.
Page 104: Changing The Strength
Configuring your Camera Changing the Strength Determining the Optimum Strength 5-40 You can change the strength of a lens in the user list two ways: • Reset the lens to factory defaults (see available only for lenses that were in the master list.) •...
Page 105: Assigning Optimum Strengths To Lenses In The User List
Assigning Optimum Strengths to Lenses in the User List April 29, 2004 Once you determine the optimum strengths for a lens in Photo Desk (see page 5-40) and add the lens to the user list, you can assign the strengths to the lens in the user list.
Page 106: Resetting To Defaults
Configuring your Camera Resetting to Defaults 5-42 NOTE: This feature is available for lenses that you added from the master list. It is not available for lenses that you have defined. You can reset strength values for a lens in the user list to the values in the master list.
Page 107: Setting Up Cards, Folders, And Files
CF card SD or MMC card April 29, 2004 Your KODAK PROFESSIONAL DCS Pro SLR/n Digital Camera has slots for two memory cards. Before capturing images to the memory cards, you can do the following: • Select a folder to hold captured images (see •...
Page 108: Inserting Cards
Setting up Cards, Folders, and Files Inserting Cards Removing Cards Eject button Card Busy LED Card icons 1. Open the Media door. 2. If using a CF card, insert it in the top slot. (The label should be up.) If using an SD or MMC card, insert it in the bottom slot. With two cards, insert either card first.
Page 109: File Types
Setting up Cards, Folders, and Files Your camera can save images as Raw or JPEG files. Raw (.dcr) files can be opened by KODAK PROFESSIONAL DCS Photo Desk. Raw images can be thought of as "digital negatives." They preserve all image information so you can apply the DCS-specific image enhancements available in DCS Photo Desk.
Page 110: File Type And Iso
Setting up Cards, Folders, and Files File Type and ISO 1. With one card, choose the appropriate card (CF Card or MMC/SD Card) from the Capture menu, then choose Raw, JPEG, or Raw+JPEG. With two cards, choose the appropriate card from the Capture menu, then choose Raw, JPEG, Raw+JPEG, or Standby.
Page 111: Choosing The Jpeg File Type
ERI (Extended Range Imaging) JPEG or Standard JPEG. • ERI JPEG files offer enhanced image editing capability. When you open them in ADOBE PHOTOSHOP, the included KODAK PROFESSIONAL DCS Extended Range Imaging File Format Module lets you apply many DCS-specific image enhancements before acquiring them into PHOTOSHOP.
Page 112: Formatting Cards
Setting up Cards, Folders, and Files Formatting Cards You may need to format a card if it was formatted incorrectly or if the data on the card becomes corrupted. If you have used a card for several sessions (for example, two or three dozen), you may want to format it on the camera you will be using so that the full capacity of the card is available.
Page 113: Recovering Deleted Files
Recovering Deleted Files April 29, 2004 Setting up Cards, Folders, and Files The Recover feature lets you recover image files recently deleted from a memory card. You can recover files if: • The card was formatted using a DCS camera. •...
Page 114: Determining Write Speed
Setting up Cards, Folders, and Files Determining Write Speed For the Most Accurate Write Speed Measurement You can determine the speed at which your camera writes data to the memory card. Write speeds are measured in Megabytes per second (Mbytes/sec). NOTE: Write speed improves if you turn the Image LCD off when capturing images.
Page 115: Folders For Captured Images
Folders for Captured Images Selecting a Capture Folder April 29, 2004 Setting up Cards, Folders, and Files You can select a folder to hold captured images. You can also create and name new folders. IMPORTANT: When you select or create a folder and there are two cards in the camera, the same folder is selected or created on both cards.
Page 116: Creating A New Folder
• The name of a new folder associated with the default naming scheme • A Custom option for creating a new naming scheme NOTE: All naming schemes follow the DCF (Digital Camera File) standard. 2. If you chose Custom, this screen appears where you can name the folder.
Page 117: Image Files
Image Files Setting the Crop Aspect Ratio April 29, 2004 Setting up Cards, Folders, and Files You can capture Raw, JPEG, or Raw+JPEG files (see you can specify resolution, crop aspect ratio, quality, and other image enhancements. You can select a crop aspect ratio to apply to JPEG images. Crop aspect ratio is not applied to Raw images on the camera.
Page 118: Setting Raw Resolution
Setting up Cards, Folders, and Files Setting Raw Resolution 6-12 There are three resolutions available for Raw files: 13.5 MP—Full-resolution Raw images (4500 x 3000) 6 MP—Half-resolution Raw images (3000 x 2000) 3.4 MP—Quarter-resolution Raw images (2250 x 1500) 1. Choose Raw Resolution from the Capture menu, then highlight a resolution.
Page 119: Setting Jpeg Resolution
Setting JPEG Resolution April 29, 2004 Setting up Cards, Folders, and Files There are four resolutions available for JPEG files: 13.5 MP—Full-resolution JPEG images (4500 x 3000) 6 MP—Half-resolution JPEG images (3000 x 2000) 3.4 MP—Quarter-resolution JPEG images (2250 x 1500) 0.8 MP—0.8 resolution JPEG images (1125 x 750) NOTE: The number of pixels varies, depending on the crop aspect ratio (see...
Page 120: Setting Jpeg Quality
Setting up Cards, Folders, and Files Setting JPEG Quality 6-14 You can specify the compression level applied to JPEG files. Best—Images have lowest compression, larger file size, and highest quality Better—Images have moderate compression, smaller file size, and moderate quality Good—Images have highest compression, smallest file size, and lowest quality 1.
Page 121: Correcting Digital Exposure
1. Choose Digital Exp. Cor. from the Image menu, then highlight Off or 2. Press the OK button. If you use more than one KODAK PROFESSIONAL DCS Pro SLR/n Digital Camera in your studio, you may want to adjust the exposure so that all of your cameras produce consistent output.
Page 122: Look
Setting up Cards, Folders, and Files Look Noise Reduction 6-16 Look applies a tone scale adjustment to JPEG images and tags Raw images for adjustment in the DCS Photo Desk software. Look is not applied to Raw images on the camera. Rather, the information is saved and applied when the images are processed in the DCS Photo Desk software.
Page 123: Sharpening Level
Sharpening Level April 29, 2004 Setting up Cards, Folders, and Files You can specify the sharpening level applied to images. Sharpening Level is applied to JPEG images on the camera. It is not applied to Raw images on the camera. Rather, the information is saved and applied when the images are processed in the DCS Photo Desk software.
Page 125: Controlling Exposure
April 29, 2004 White Balance adjusts an image to match the type of lighting used when capturing images. Your KODAK PROFESSIONAL DCS Pro SLR/n Digital Camera offers two types of White Balance: Preset and Click. When you specify a Preset or Click Balance option, that setting is applied to subsequently captured images.
Page 126: Preset White Balance
Controlling Exposure Preset White Balance • Choose White Balance from the Capture menu, choose a Preset option, then choose a setting. Preset Category Preset Options Auto Daylight Tungsten Fluorescent Flash Click Balance An approximate Kelvin temperature scale value associated with the selected Preset setting appears in the Digital Status display.
Page 127: Click Balance
Click Balance Using the Current Image for Click Balance April 29, 2004 Click balance takes RGB values from the current image or from previously saved or loaded settings and applies them to subsequently captured images. 1. Select an image (see page 11-7).
Page 128: Displaying The Saved Settings Menu
Controlling Exposure Displaying the Saved Settings Menu 1. Choose White Balance from the Capture menu, choose Click Balance , then highlight Saved. 2. Press the OK button to display the Saved Settings menu. April 29, 2004...
Page 129: Using A Saved Setting
For saved settings to appear in the list, you must first do one of the following: • Save a setting on the camera (see • Save a setting to a card using the KODAK PROFESSIONAL DCS Photo Desk software on your computer, then load the setting from the card (see page 7-7).
Page 130: Saving A Setting On The Camera
Controlling Exposure Saving a Setting on the Camera 1. Select an image (see page 11-7). 2. Choose Save <image #> from the Saved Settings menu, then press the OK button. 3. Press the OK button to save the setting and close the confirmation screen.
Page 131: Loading Settings From A Card
Loading Settings from a Card Deleting Settings April 29, 2004 Using the DCS Photo Desk software, you can save settings to the root directory of a card. (These filenames have .WB extension.) IMPORTANT: Settings must be saved to the root directory or you will not be able to load them into your camera.
Page 132: Exposure
Controlling Exposure Exposure Exposure Metering Systems Choosing a Metering System Matrix Metering/3D Matrix Metering You can choose from three metering systems to suit the lighting for your subject. NOTE: You cannot use metering systems when a non-CPU NIKKOR lens is attached.
Page 133: Center-Weighted Metering
Center-Weighted Metering Spot Metering April 29, 2004 Center-Weighted Metering places special emphasis on brightness within the 12 mm diameter circle in the viewfinder. Use Center-Weighted Metering to base exposure on a specific area of the scene. Nearly 100% of the meter’s sensitivity is concentrated on the 4 mm diameter area (approximately 1% of the entire frame) within the selected focus area of the viewfinder.
Page 134: Capturing Images In Each Exposure Mode
Controlling Exposure Capturing Images in Each Exposure Mode 7-10 Light reaching the imager is controlled by the shutter speed and lens aperture. The proper combination results in a correct exposure. Shutter speed and lens aperture settings are based on the ISO speed and the operation of the camera’s exposure control system.
Page 135: Programmed Auto Exposure Mode
Programmed Auto Exposure Mode April 29, 2004 In Programmed Auto Exposure mode, the camera automatically controls exposure according to the exposure combination in the program chart (see below). This mode is helpful when you want to concentrate only on the shutter release opportunity. For more complex situations, use Flexible Program (see page 7-12), Exposure Compensation (see...
Page 136 Controlling Exposure 7-12 Flexible Program Flexible Program changes the shutter speed/aperture combination in Programmed Auto Exposure mode. Flexible Program lets you temporarily change an automatically set shutter speed/aperture combination, while maintaining consistent exposure. You can capture images in Programmed Auto Exposure mode as though you were in Shutter-Priority Auto or Aperture-Priority Auto mode.
Page 137: Shutter-Priority Auto Exposure Mode
Shutter-Priority Auto Exposure Mode April 29, 2004 Shutter-Priority Auto Exposure mode lets you manually set the shutter speed (2 - 1/4000 seconds). The camera selects a suitable aperture. With high shutter speeds, you can freeze the motion of a fast moving subject; with slower speeds, you can create a blurry motion effect.
Page 138: Aperture-Priority Auto Exposure Mode
Controlling Exposure Aperture-Priority Auto Exposure Mode 7-14 Aperture-Priority Auto Exposure mode lets you manually set the aperture. The camera automatically selects a suitable shutter speed. By varying the aperture, and thus controlling the depth of field, you can sharpen the background and foreground, or blur the background.
Page 139: Manual Exposure Mode
Manual Exposure Mode April 29, 2004 3. Compose the picture, focus, and capture the image. If the subject is too bright, HI appears in the Top Status LCD and viewfinder. Select a smaller aperture. If the warning remains, use an ND filter.
Page 140 Controlling Exposure 7-16 3. Rotate the Sub-Command dial to set the aperture. Aperture appears in the electronic analog exposure display in the viewfinder. 4. Compose the picture, focus, and capture the image. April 29, 2004...
Page 141: Auto Exposure Lock
Auto Exposure Lock April 29, 2004 Electronic analog exposure display The electronic analog exposure display in the viewfinder indicates the difference between the selected exposure (shutter speed and aperture) and the correct exposure. This is not available with Long Time exposure. The electronic analog exposure display blinks when the subject brightness is beyond the camera’s exposure range.
Page 142 Controlling Exposure 7-18 The area of exposure lock varies in the following situations: • With Spot Metering, when the focus area and metering area are linked, exposure locks at the selected focus area. • With Spot Metering with Dynamic AF Mode and Closest Subject Priority, exposure locks at the center focus area.
Page 143: Exposure Compensation
Exposure Compensation Cancelling Exposure Compensation April 29, 2004 Use Exposure Compensation to modify exposure control (for example, from the ISO standard). This is useful when you are intentionally achieving under- or overexposure. Use Center-Weighed or Spot Metering with Exposure Compensation. You can use any exposure mode. You can check the compensation value by pressing NOTE: Do not confuse Exposure Compensation with Digital Exposure Correction, which is used to correct errors in exposure (see...
Page 144: Auto Exposure Bracketing
Controlling Exposure Auto Exposure Bracketing 7-20 When it might be difficult to obtain a proper exposure, use Auto Exposure Bracketing to capture the same subject at two or three different exposures with a variable exposure compensation degree (maximum of ±2 EV). NOTE: In any Exposure mode, Flash Exposure Bracketing and Auto Exposure Bracketing are performed simultaneously when you use a Speedlight.
Page 145 April 29, 2004 2. Press and hold and rotate the Sub-Command dial to set the number of shots and the compensated EV value. The following table shows possible combinations, based on the number of shots and compensated EV values: Number of shots Bracketing bar and compensated graphs...
Page 146: Cancelling Auto Exposure Bracketing
Controlling Exposure Cancelling Auto Exposure Bracketing 7-22 3. Compose the picture, focus, and capture the image. The compensated shutter speed and aperture values appear in the Top LCD and viewfinder during capture. Auto Exposure Bracketing behaves differently in the following situations: •...
Page 147: Bulb Mode Exposure
Bulb Mode Exposure April 29, 2004 Bulb Mode exposure is useful when you are capturing nighttime scenes that require extended exposure of more than 30 seconds. NOTE: Extended exposure times may degrade image quality. NOTE: Choose Long as the Long Exposure setting when using Bulb. Choose Longer for times longer than two seconds (see page 5-22).
Page 148 Controlling Exposure 7-24 2. Rotate the Main-Command dial to select buLb, and rotate the Sub-Command dial to set the aperture. IMPORTANT: If buLb is selected in Manual Exposure mode and you change to Shutter-Priority Auto Exposure mode without cancelling buLb, buLb blinks and the shutter locks. Select a shutter speed other than buLb by rotating the Main-Command dial.
Page 149: Focusing
Focusing Autofocus Focus Modes Choosing a Focus Mode April 29, 2004 You can set up your KODAK PROFESSIONAL DCS Pro SLR/n Digital Camera to focus automatically (described below) or you can focus manually (see page 8-9). With autofocus, the camera does much of the work required to properly focus an image.
Page 150: Af Area Mode
Focusing AF Area Mode Choosing an AF Area Mode There are three AF Area modes: Single Area AF [ ]—You select a single focus area. Use this mode when the subject is stationary. Dynamic AF [+]—You select the primary focus area (the first to detect the subject).
Page 151: Choosing A Focus Area
Choosing a Focus Area April 29, 2004 You can select one of the five focus areas, depending on the subject’s position in the frame or your desired composition. 1. Turn off the Image LCD. IMPORTANT: When the Image LCD is on, the Four-way switch is used to access digital functions.
Page 152: Viewfinder And Top Status Lcd Indicators
Focusing Viewfinder and Top Status LCD Indicators Focus AF Area Dynamic AF Mode Mode Mode with Single Servo Single Area Single Servo Dynamic AF Activated in initial setting Single Servo Dynamic AF Cancel with "Single Servo AF" Custom Setting Continuous Single Area Servo AF Continuous...
Page 153: Operations And Suitable Situations
Operations and Suitable Situations Focus AF Area Dynamic AF Mode Mode Single Servo Single Area Single Servo Dynamic AF Activated in initial setting Single Servo Dynamic AF Cancel with "Single Servo AF" Custom Setting Continuous Single Area Servo AF Continuous Dynamic AF Not activated in Servo AF initial setting...
Page 154: Af-Assist Illuminator
Focusing AF-Assist Illuminator When you lightly press the Shutter Release button, the AF-Assist Illuminator turns on automatically under the following conditions: • Single Servo AF Focus mode • AF NIKKOR lens is used • Subject is dark and the center focus area is selected •...
Page 155: Locking Focus
Locking Focus April 29, 2004 Use Focus Lock to capture a subject that is framed outside of the five focus areas and in situations where autofocus may not work as expected (see page 8-8). Focus lock works differently in Single Servo AF and Continuous Servo AF modes.
Page 156: Situations Where Autofocus May Not Work As Expected
Focusing Situations where Autofocus May Not Work as Expected Autofocus may not work as expected in the following situations. In these situations, focus manually using the clear matte field (see focus on a different subject at the same distance, use focus lock, then recompose.
Page 157: Manual Focus
Manual Focus Using the Electronic Rangefinder for Manual Focus April 29, 2004 Use manual focus in situations where autofocus does not work as expected or when you are not using an AF NIKKOR lens. 1. Set the Focus Mode selector to M. 2.
Page 158: Depth Of Field And Focus Tracking
Focusing Depth of Field and Focus Tracking Depth of Field Focus Tracking 8-10 Your camera is equipped with autofocus where focusing is automatically executed. Basics of the relationship between focus, depth of field, and focus tracking are explained in this section. When focusing, consider depth of field.
Page 159: Capture Workflow
April 29, 2004 This chapter outlines two general workflows to help you manage images captured on your KODAK PROFESSIONAL DCS Pro SLR/n Digital Camera. The workflows may vary between studio sessions and between different types of photography jobs on locations.
Page 160: Device And Media Preparation
MACBETH color chart, a gray card or a neutral area in the image, then perform Click Balance. To set up White Balance in the KODAK PROFESSIONAL DCS Photo Desk software, capture an image of a MACBETH color chart, a gray card, then adjust later using the software.
Page 161: Capturing And Evaluating Test Images
April 29, 2004 Before your photo session begins, and occasionally during a session, you should capture and evaluate images to be sure that the lighting and camera setup are producing the desired results. DCS Pro SLR/n Tool page 11-2) page...
Page 162: Occasional Verification
• Connected video monitor. (The Image LCD is disabled when this is in use.) • Remove the memory card from the camera and plug it into a laptop computer. View the images using KODAK PROFESSIONAL DCS Photo Desk software. When the photo session is complete, insert the memory card in a card reader connected to your computer.
Page 163: Kodak Professional Dcs Photo Desk
KODAK PROFESSIONAL DCS Photo Desk KODAK PROFESSIONAL Extended Range Imaging File Format Module Capture Workflow when the Camera is Connected to a Computer Connect to Computer Capture, Evaluat e Test Images April 29, 2004 Platforms: WINDOWS and MACINTOSH When you open Raw images in DCS Photo Desk you can do the following: •...
Page 164: Connecting To A Computer And Power Supply
Capturing Images Occasional Verification Editing Images Connect the DCS Pro SLR/n to your computer and power supply. Use the included AC adapter as your power supply. (You can use a battery, but the AC adapter provides an unlimited source of power.) KODAK PROFESSIONAL DCS Camera Manager is included with your camera.
Page 165: Flash Photography
Built-in Speedlight April 29, 2004 Your KODAK PROFESSIONAL DCS Pro SLR/n Digital Camera contains a built-in Speedlight with a Guide Number at ISO 200 of 17 m / 56 ft. (Guide Number at ISO 100 is 12m / 39 ft.) The flash angle is wide enough to cover the field of view of a 28 mm lens.
Page 166: D-Ttl Flash Control
Flash Photography D-TTL Flash Control 10-2 The type of D-TTL flash control varies with the type of lens in use: Lens Flash control for built-in Speedlight Type G or 3D Multi-Sensor Balanced Fill-Flash for Digital SLR: D CPU lens Based on information from the matrix metering system, flash output is adjusted to provide balance between the main subject and ambient background lighting.
Page 167: Using The Built-In Speedlight
Using the Built-in Speedlight April 29, 2004 Follow these instructions when using a G-type or D-type AF NIKKOR lens. NOTE: Continuous Shooting Drive mode cannot be used in flash photography. 1. Set the Metering system to Matrix or Center-Weighted metering ( page 7-8).
Page 168 Flash Photography 10-4 Available Shutter Speed and Aperture at Each Exposure Mode Exposure Mode Available Shutter Speed Programmed Auto Automatically set (1/125-1/60 sec.) Shutter-Priority Auto 1/125-30 sec. Aperture-Priority Auto Automatically set (1/125-1/60 sec.) Manual 1/125-30 sec. Shutter speed shifts automatically to 1/125 second when the shutter speed is set faster than 1/125 second and the flash is fired (or an attached optional Speedlight is turned on).
Page 169: Flash Shooting Distance Range For The Built-In Speedlight
Flash Shooting Distance Range for the Built-in Speedlight April 29, 2004 The flash shooting distance range varies, depending on ISO and aperture. 200 400 Guide number Aperture value You can also calculate the maximum flash shooting distance by dividing the guide number by the aperture value. For example, with an aperture of f/2.8 and an ISO of 200, the maximum flash shooting distance will be 17 / 2.8 = approximately 6 m.
Page 170: Usable Lenses With The Built-In Speedlight
Flash Photography Usable Lenses with the Built-in Speedlight 10-6 NOTE: You cannot use the built-in Speedlight with zoom lenses set to Macro in wide angle. You can use the following lenses with the built-in Speedlight: • 28 mm to 300 mm CPU lenses. Be sure to remove the lens hood. Vignetting occurs at the edges of the frame resulting in underexposure with the following zoom lenses, which have focal length or shooting distance limitations:...
Page 171: Ready-Light
Ready-Light April 29, 2004 You can use 28 to 200 mm non-CPU NIKKOR lenses (AI-S, AI, AI-modified NIKKOR) and Series-E lenses, except 200 mm f/2 lens with the built-in Speedlight. However, the lenses have limitations in usable focal length or shooting distance: •...
Page 172: Hot Shoe
Flash Photography Hot Shoe PC Sync Terminal 10-8 You can attach an optional Speedlight (for example the SB-28/28DX, SB-27, SB-26, SB-25, SB-24, SB-23, SB-22, SB-80DX, SB-800 AF, or SB-50DX) to the Hot Shoe. You can attach a cable from optional Speedlights directly into the PC Sync Terminal.
Page 173: Flash Sync Modes
Flash Sync Modes April 29, 2004 • Press and hold the Flash Sync Mode button and rotate the Main-Command dial to set the Flash Sync mode. Five Flash Sync modes are available: Front-Curtain Sync Set the Flash Sync mode to Front-Curtain Sync for normal flash photography.
Page 174 Flash Photography Slow Sync Normally the camera’s shutter speed is automatically set to 1/60 to 1/125 second for flash photography in Programmed Auto or Aperture-Priority Auto Exposure mode. However, for shooting nighttime scenes, Slow Sync uses a slower shutter speed (down to 30 seconds) to bring out background details using all available light.
Page 175: Flash Sync Modes For Optional Speedlights
Flash Sync Modes for Optional Speedlights April 29, 2004 Red-Eye Reduction The Red-Eye Reduction lamp lights for approximately one second before the flash fires to reduce the red-eye effect in photos of people or animals. Red-Eye Reduction with Slow Sync Red-Eye Reduction and Slow Sync mode are simultaneously set.
Page 176: Flash Exposure Compensation
Flash Photography Flash Exposure Compensation 10-12 With flash exposure compensation, you can change the correct exposure computed by the Speedlight and camera. For example, you can highlight the main subject by increasing the flash output, or prevent the main subject from becoming too bright by decreasing the flash output.
Page 177: Using Optional Speedlights
Using Optional Speedlights Flash mode D-TTL Speedlight D-TTL SB-80DX, SB-28DX, SB-800 AF, SB-50DX April 29, 2004 SB-series 80DX, 50DX, 28DX, and 800 AF Speedlights support D-TTL flash control when mounted on the camera hot shoe. D-TTL flash control is not available with other optional Speedlights.
Page 178 D, shutter speed is set to under 1/90 S. 2 When an SB-27 is mounted on the DCS Pro SLR/n, the flash mode is automatically set to TTL, and the shutter-release is disabled. Set the SB-27 to A (non-TTL auto flash).
Page 179: Notes For Using An Optional Speedlight
Notes for Using an Optional Speedlight April 29, 2004 • Flash sync speed is 1/125 second or slower when using an optional Speedlight. • Available ISO is 160 - 1600 (RAW files) or 160 - 800 (JPEG files). • With the SB-26, 25, or 24, Flash Sync mode set on the Speedlight overrides the setting on the camera.
Page 181: Working With Images On The Camera
Working with Images on the Camera Reviewing Images Selecting an Image Mode April 29, 2004 To review images on the Image LCD: 1. Select an Image mode. 2. Select a review folder (see page 3. Browse through the images (see •...
Page 182: Changing The Duration Of The Image Mode Menu Display
• Tag icon (if image has been tagged) NOTE: Highlight data in the "ERI" zone of the histogram is clipped during normal processing. Recover ERI data using Exposure / Tone in KODAK PROFESSIONAL DCS Photo Desk software. page 11-7), its...
Page 183: Interpreting A Histogram
Interpreting a Histogram Underexposure Overexposure Low key High key Zoom Mode Enabling or Disabling the Region of Interest Box April 29, 2004 Working with Images on the Camera • A histogram that is clipped at the right indicates overexposure and one that is clipped at the left indicates underexposure.
Page 184: Zooming
Working with Images on the Camera Zooming Panning Luminometer 11-4 • With the region of interest box enabled, press the OK button. There are three zoom levels. The first actuation zooms to 1:4 (one pixel displayed for every four in the image), the second to 1:1, and the third returns to the un-zoomed 1:16.
Page 185: Multiple Image Mode
Multiple Image Mode Status Bar April 29, 2004 Working with Images on the Camera Four image thumbnails appear with the Status bar at the bottom. The selected image (see page 11-7) is highlighted. The Status bar appears at the bottom of the Image LCD in Single Image and Multiple Image modes.
Page 186: Selecting A Review Folder
Working with Images on the Camera Selecting a Review Folder 11-6 The Nav+ button provides a shortcut for quickly navigating among folders and images within a folder. NOTE: If there are two cards in the camera, the Nav+ button navigates on the card containing the currently selected folder.
Page 187: Browsing Through Images
Browsing Through Images Browsing Through Images Using the Nav+ Button Location Bar Selecting an Image April 29, 2004 Working with Images on the Camera • Press the left or right side of the Four-way switch to navigate through images in the selected folder. NOTE: In Zoom mode, with the region of interest box enabled, first press the Cancel button to disable the region of interest box.
Page 188: Overexposure Indicator
Working with Images on the Camera Overexposure Indicator Changing Display Contrast and Brightness 11-8 You can indicate areas of overexposure in Single or Multiple Image Display modes. 1. Choose Single or Multiple Image mode. 2. Choose Overexp. Indicator from the Review menu, then highlight Off or On.
Page 189: Auto Review
Auto Review Slide Show April 29, 2004 Working with Images on the Camera When you enable the Auto Review feature, the Image LCD turns on when you capture an image then displays the image for the amount of time you specify.
Page 190: Starting/Stopping A Slide Show
Working with Images on the Camera Starting/Stopping a Slide Show 11-10 3. Select the images to appear in the slide show: Choose Slide Show from the Review menu, then highlight All on cards, All in folder, Tagged on cards, or Tagged in folder. 4.
Page 191: Deleting Images
Deleting Images April 29, 2004 Working with Images on the Camera You can delete a single image, all images in a folder or on a card, or all untagged images in a folder or on a card. Associated sound files are also deleted.
Page 192: Tagging Images
You can tag one or more images for a variety of operations: • On the camera, you can specify that the tagged images are not deleted. • In the KODAK PROFESSIONAL DCS Photo Desk software, you can use tags as a selection mechanism for a variety of operations.
Page 193: Recording Sound Files
Recording Sound Files April 29, 2004 You can record a sound file to annotate the selected image, either immediately after you capture it or later when you review it. If you delete the image using camera controls, or copy or delete it using the DCS Photo Desk software, the sound file will also be copied or deleted.
Page 195: Using The Video Output Port
1. Connect a video cable (not included) with a 2.5mm phone plug to the Video port. 2. Connect the other end of the video cable to your monitor. NOTE: Your dealer has a compatible KODAK video cable (catalog number 1817774). 12-1...
Page 196: Enabling/Disabling External Video
Using the Video Output Port Enabling/Disabling External Video 12-2 You can specify the video standard used to view images on an external monitor. NTSC—North America (default) PAL—Europe and Asia 1. Choose External Video from the Review menu. 2. Choose NTSC or PAL to enable. Choose Off to disable. 3.
Page 197: Connecting To Your Computer
Advantages to an IEEE 1394 Connection Advantages to a Card Reader April 29, 2004 There are two ways to access KODAK PROFESSIONAL DCS Pro SLR/n Digital Camera images from your computer: • Connect the camera to the computer using an IEEE 1394 connection, then capture images using the KODAK PROFESSIONAL DCS Camera Manager software.
Page 198: Connecting Your Camera To The Computer
You must use an IEEE 1394 connector and adapter card. 1. Connect the KODAK PROFESSIONAL DCS Pro Charger / AC Adapter or charge and insert the KODAK PROFESSIONAL DCS Pro Battery.
Page 199 Connecting to Your Computer You may connect more than one camera or other IEEE 1394 devices to the card as long as you avoid a closed loop configuration. (The drawing indicates an acceptable configuration.) The camera’s IEEE 1394 port does not support a second pass-through connector and is meant to be the last device on the “daisy chain.”...
Page 200: Quitting-Disconnecting From The Computer
Doing so can corrupt images on the computer. 1. Exit KODAK PROFESSSIONAL DCS Photo Desk software if is running. 2. Disconnect the camera from the computer. If your computer has a card reader, you can access images by placing a memory card containing camera images in the reader.
Page 201: Camera Care
Handling April 29, 2004 With careful handling, your KODAK PROFESSIONAL DCS Pro SLR/n Digital Camera should produce images of the highest quality for years to come. • Be careful not to drop your camera or subject it to shock. (While the camera has been designed for durability, it is a precision instrument and should be handled with care.)
Page 202: Cleaning
Camera Care Cleaning 14-2 CAUTION Remove the lens from the camera before cleaning. 1. Turn off the camera. 2. Disconnect the camera from the AC adapter and from the computer. 3. Using a damp cloth, clean only the outside of the camera body, the Top Status LCD, the Back Status LCD, and the Image LCD.
Page 203: The Imager
• Visually inspect the imager for dirt. 1. Capture an image of a plain white object, such as a clean, white wall. 2. Examine the image on the computer using the KODAK PROFESSIONAL DCS Photo Desk software. Imperfections in the image, such as dark clusters or streaks, may indicate a dirty imager.
Page 204: Inspecting And Cleaning The Imager
6. Press the OK button. The mirror raises and the shutter opens. 7. Inspect the imager according to the Technical Information Bulletin (TIB) procedure at www.kodak.com/go/dcs. 8. Choose Imager Clean from the Tools menu then choose Close. 9. Press the OK button.
Page 205: Storing
Storing Top and Back Status LCDs April 29, 2004 Carefully check the camera’s operation after lengthy storage, when the camera has not been used for a long time, or before an important trip or shooting assignment. • When storing your camera, wrap it in a clean, soft cloth and place it in a well-ventilated, cool, dry, dust-free place.
Page 207: Serial Data Collection And Global Positioning System
Serial Data Collection and Global Positioning System Serial Data Collection Connecting a Device to the Serial Port April 29, 2004 You can use the serial port on your camera to collect serial data. The following Serial Port settings are available: •...
Page 208: Serial In Mode
NOTE: The Scan-Shoot and Scan-Shoot Multi features allow connectivity of serial bar code scanners. To enable, please contact your dealer of Kodak products. 1. Choose Serial Port from the Tools menu then choose Serial In. 2. Select a Serial In option, described below.
Page 209: Serial In Status
Serial In Status Serial Out Mode April 29, 2004 Serial Data Collection and Global Positioning System When you choose New Images or Previous Image from the Serial In menu, the Serial In Status choice becomes available. When you choose Status, one of two screens appears.
Page 210: Setting The Baud Rate
• A GPS unit that supports standard NMEA data transfer • A GPS serial cable (from vendor supplying GPS units) • An RS232 3.5 mm compatible cable to connect to the camera (available from KODAK - catalog #8010654) April 29, 2004...
Page 211: Using The Gps Feature
Using the GPS Feature April 29, 2004 Serial Data Collection and Global Positioning System 1. Connect the appropriate end of the GPS serial cable to the serial port on your camera. 2. Connect the other end of the cable to the GPS unit. 3.
Page 213: Appendix A: Specifications
Appendix A: Specifications Dimensions Weight (without batteries or memory cards) Image sensor ISO range Lens mount Auto-focus system Number of focus points Auto-focus sensitivity (ISO 100 with f/1.4) Auto-focus assist AF Area mode Focus lock Shutter Shutter speeds Maximum flash synchronization speed April 29, 2004 Height: 131 mm (5.16 in.) Width: 158 mm (6.22 in.)
Page 214: Specifications
Specifications Capture modes Metering system Metering modes Metering sensitivity (ISO 100 equivalent with f/1.4) Exposure Compensation Flash Exposure Compensation AE Lock Exposure modes Viewfinder Viewfinder magnification (50 mm lens @ infinity) Diopter adjustment Viewfinder eyepoint Viewfinder coverage Viewfinder information Top Status LCD (backlit) Single frame, continuous TTL full aperture exposure metering, three Metering systems available: 3D Matrix Metering, Center-Weighted Metering, Spot Metering...
Page 215 Digital LCD (backlit) Image LCD Focus Screen Custom Settings AE Bracketing Depth-of-Field Preview Remote Control Self timer Electronic Strobe April 29, 2004 Capture information (interactive): White Balance, ISO, CF and SD Cards, JPEG quality, Raw and JPEG resolution, Crop aspect ratio, Microspect ratio Review information (read only): Current image number, current folder number, Crop aspect ratio, White Balance, Resolution, ISO Tool tips...
Page 216 NIKON 10-pin compatible accessory interface 1 Type II CF+ compatible CF card, 1 SD/MMC card Detects ±90° rotation about optical axis KODAK PROFESSIONAL DCS Photo Desk, KODAK PROFESSIONAL DCS Camera Manager, KODAK PROFESSIONAL Extended Range Imaging File Format Module Instant-return type with Depth-of-Field Preview button...
Page 217: Burst Depth
Tripod socket Two-Button reset Burst Depth April 29, 2004 KODAK PROFESSIONAL DCS Pro Battery or KODAK PROFESSIONAL DCS Pro Charger / AC Adapter Power On and Off positions Shuts off automatically after 8 seconds if no operations are performed. Activated by lightly pressing the Shutter Release button.
Page 219: Appendix B: Lens Compatibility
Appendix B: Lens Compatibility CPU contacts of CPU lens D-type NIKKOR lens April 29, 2004 Use a CPU lens (except IX-NIKKOR) with your camera. D-type AF lenses provide access to all available functions. If you use a non-CPU lens, F-- appears in place of the aperture indication in the Top Status LCD and viewfinder.
Page 220: Compatible Lenses And Lens Accessories
Lens Compatibility Compatible Lenses and Lens Accessories Lens / Accessories G-type or D-type AF NIKKOR , AF-S, AF-1 NIKKOR AF-I Teleconverter Non-D-type AF NIKKOR, (except AF NIKKOR for F3AF AI-P NIKKOR AI-S or AI type NIKKOR, Series E, AI-modified NIKKOR Medical-NIKKOR 120 mm f/4 Reflex-NIKKOR AI-S or AI type Teleconverters...
Page 221: Incompatible Lenses And Lens Accessories
Incompatible Lenses and Lens Accessories April 29, 2004 CAUTION Do not attach the following lenses or accessories to your camera. Doing so can damage your camera or lens. • TC-16A Teleconverter • Non-AI lenses • 400 mm f/4.5, 600 mm f/5.6, 800 mm f/8, and 1200 mm f/11 with Focusing Unit AU-1 •...
Page 223: Appendix C: Troubleshooting
HI appears April 29, 2004 In addition to the issues described in this section, the following Web page provides answers to many of your questions: http://www.kodak.com/go/DCS. Cause Lens is not set to its minimum aperture. Attached Speedlight is not set at TTL Auto Flash in P mode.
Page 224: Troubleshooting
Troubleshooting Top Status LCD Viewfinder Lo appears Lo appears — Electronic analog exposure display blinks buLb blinks buLb blinks Shutter speed 125 appears indication blinks — blinks for 3 seconds after flash Err blinks Err blinks Cause Underexposure warning (subject is too dark).
Page 225: Other Problems
Other Problems Problem Camera does not power on. Camera does not power on when the power module is used. Camera does not recognize the card in the camera. Shutter will not actuate. Camera seems to be locked. Cannot get out of custom settings. Camera seems to contain hidden information.
Page 226 Troubleshooting Problem Can’t recover deleted images. Images are out of focus. Color is not right. Images have low contrast. Some subject matter is out of focus. Images in the viewfinder look blurry. The wrong language appears on camera screens. Accidentally deleted an image. Image contrast is wrong in the Image LCD.
Page 227: Appendix D: Warranty
If this equipment does not function properly during the warranty period due to defects in material or workmanship, Kodak will, at its option, either repair or replace the equipment without charge, subject to the conditions and limitations stated herein. Such repair service will include all labor as well as any necessary adjustments and/or replacement parts.
Page 228: Limitations
Should you need to return equipment to Kodak, Kodak is not responsible for the loss or damage of equipment while in transport to a Kodak authorized service center. You may, at your option, choose to insure equipment for loss or damage with the carrier of your choice.
Page 229: Outside The United States
In countries other than the United States, warranty terms may be different. Unless a specific Kodak warranty is communicated to the purchaser in writing by Kodak, no warranty or liability exists even though defect, damage or loss may be by negligence or other act of Kodak.
Page 230: How To Obtain Service
In Canada, call 1-800-GO-KODAK (1-800-465-6325). In other countries, call your nearest Kodak representative. If service is required, your Kodak representative will instruct you to return the unit to the nearest service center for repair and will issue a return authorization number.
Page 231: Product Support Options
Digital Camera, you are entitled to product support for both hardware and software, provided your camera is registered with Eastman Kodak Company. You may register with Kodak via mail, fax, or through Kodak’s World Wide Web site: http://www.kodak.com/go/DCSRegister. Support is provided through a variety of options: 1.
Page 232 Service maintenance agreements, which cover the repair and support of the DCS Pro SLR/n Camera and software, are available. In North America, contact the regional Service Marketing group at: 1-800-645-6325.
Page 233: Glossary
Glossary AE (Automatic Exposure) lock Continuous Servo AF Depth of field Drive mode Exposure bracketing April 29, 2004 Used to hold an automatically controlled shutter speed and/or aperture. Recommended when you want to control an exposure based on a scene’s particular brightness area with Center-Weighted or Spot Metering.
Page 234: Exposure Control
Exposure compensation Exposure control f-number Flexible Program Focus-Priority for autofocus The shutter cannot be released until the subject is in focus. Focus Tracking Glossary-2 Exposure compensation for available light is activated by changing the shutter speed and/or lens aperture. Use the AE-L/AF-L (Auto Exposure/Autofocus Lock) button, the Exposure Compensation button, or Auto Exposure Bracketing.
Page 235 Focal length Front-Curtain Sync Guide number Histogram Manual flash April 29, 2004 The distance from the principal point to the focal point. In 35 mm-format cameras, lenses with a focal length of approximately 50 mm are called normal or standard lenses. Lenses with a focal length less than approximately 35 mm are called wide angle lenses, and lenses with a focal length more than approximately 85 mm are called telephoto lenses.
Page 236 Matrix Metering system Rear-Curtain Sync Release-Priority for autofocus Single Servo AF Slow Sync Vignetting White balance Glossary-4 An advanced exposure metering system using a multi-segment sensor and computer. Flash fires an instant before the second (rear) curtain of the focal plane shutter begins to move.
Page 237 Index Numerics 3D multi-sensor balanced fill-flash for digital SLR, 10-2 af area mode, 8-2 choosing, 8-2 af-assist illuminator, 8-6 aperture-priority auto exposure mode, 7-14 auto exposure bracketing, 7-20 cancelling, 7-22 auto exposure lock, 7-17 auto review, 11-9 autofocus, 8-1 situations where autofocus may not work as expected, 8-8 basic camera operations, 4-14 basic menu, using, 4-3...
Page 238 Index using the current image, 7-3 COMPACTFLASH cards, 6-1 computer connecting to, 13-1, 13-2 disconnecting from, 13-4 configuring your camera, 5-1 connecting camera to computer, 13-1 continuous drive mode, 5-25 CR 2032 coin cell, 3-6 crop aspect ratio, 6-11 custom settings, 5-2 custom settings table, 5-2 DCS Pro 14n back, 2-2...
Page 239 KODAK PROFESSIONAL DCS Pro Battery, 3-2 KODAK PROFESSIONAL DCS Pro Charger/Adapter, 3-2 using to charge batteries, 3-2 using to power camera, 3-2 KODAK PROFESSIONAL DCS Pro Power Module, 3-2 language, selecting, 5-11 LCD illuminator, 2-20 LCDs digital status LCD, 2-13...
Page 240 4-10 panning, 11-4 pc sync terminal, 2-22, 10-8 powering your camera, 3-1 using KODAK PROFESSIONAL DCS Pro Battery, 3-2 using KODAK PROFESSIONAL DCS Pro Power Module, 3-2 programmed auto exposure mode, 7-11 ready light, 10-7...
Page 241 10-10 software KODAK PROFESSIONAL DCS Camera Manager, 9-6 KODAK PROFESSIONAL DCS Extended Range Imaging File Format Module, 9-5 KODAK PROFESSIONAL DCS Photo Desk, 9-5 sound files, 11-13 specifications, A-1 Speedlights built-in, 10-1 optional. see optional speedlights spot metering, 7-9...
Page 244 EASTMAN KODAK COMPANY Rochester, New York 14650 www.kodak.com/go/dcs © Eastman Kodak Company, 2003. TM: Kodak, Kodak Professional P/N 6B8983...

Kodak DCS Pro SLR/n User Manual

1 Important Information

2 About Your Camera

3 Powering Your Camera

4 The Basics

5 Configuring Your Camera

6 Setting up Cards, Folders, and Files

7 Controlling Exposure

8 Focusing

9 Capture Workflow

10 Flash Photography

11 Working with Images on the Camera

12 Using the Video Output Port

13 Connecting to Your Computer

14 Camera Care

15 Serial Data Collection and Global Positioning System

Quick Links

Troubleshooting

Related Manuals for Kodak DCS Pro SLR/n

Summary of Contents for Kodak DCS Pro SLR/n