Auto Exposure Lock - Kodak DCS Pro SLR/n User Manual

Auto Exposure Lock

April 29, 2004
Electronic analog exposure display
The electronic analog exposure display in the viewfinder indicates the
difference between the selected exposure (shutter speed and aperture) and
the correct exposure. This is not available with Long Time exposure. The
electronic analog exposure display blinks when the subject brightness is
beyond the camera's exposure range. The following are examples of
electronic analog exposure display indications.
Correct
exposure
Use Auto Exposure Lock to control the exposure of a specific area within a
scene.
1. Rotate the Metering System selector to select Center-Weighted or Spot
Metering.
NOTE: Matrix Metering is not recommended since the effect of the Auto
Exposure lock cannot be effectively attained.
2. Position the focus area on the subject and lightly press the Shutter
Release button, then press
appears in the viewfinder.
Focus remains locked while you press
viewfinder.
Controlling Exposure
-1/2 EV Over +3 EV
. Confirm that the focus indicator
. EL appears in the
7-17