Browsing Through Images; Browsing Through Images Using The Nav+ Button; Location Bar; Selecting An Image - Kodak DCS Pro SLR/n User Manual

Browsing Through Images

Browsing Through Images
Using the Nav+ Button

Location Bar

Selecting an Image

April 29, 2004
• Press the left or right side of the Four-way switch to navigate through
images in the selected folder.
NOTE: In Zoom mode, with the region of interest box enabled, first press
the Cancel button to disable the region of interest box.
The right side of the Four-way switch navigates "forward" to
higher-numbered images in the folder; the left side navigates
"backward."
If you continue navigating forward after the last image in the folder, the
first image appears. If you continue navigating backward after the first
image in the folder, the last image appears. (A blank screen appears
before the first or last image to indicate that the display is wrapping.)
• Press and hold the Nav+ button, then press the right or left of the
Four-way switch to display every tenth higher or lower-numbered image
in the selected folder.
The Location bar appears at the bottom of the Image LCD in Single Image
mode, in Multiple Image mode, or in Zoom mode when the Region of
Interest box is disabled. The bar indicates the position of the current image
relative to the other images in the selected folder.
As you navigate through the images in Multiple Image mode, the images are
highlighted one at a time. Release the Four-way switch when the desired
image is highlighted.
As you navigate in other Image modes, the displayed image is selected
when you release the Four-way switch.
Working with Images on the Camera
11-7