Chapter 1
ETERNUS DX Installation
1.7
Outlet/Socket Specifications
●
AC125V Power Cords (for Regions Other than EMEA&I)
AC125V power cords are used to connect devices to the NEMA 5-15R power socket type. These power cords
can be used if the specifications of the connection device allow AC100V.
Table 1.7 Specifications for AC125V Power Cords (for Regions Other than EMEA&I)
Usage
Used for connection be-
tween the ETERNUS DX
and the socket
(IEC60320-C13 n
NEMA 5-15P)
●
AC100V and AC200V Power Cords (for Regions Other than EMEA&I)
AC100V/200V power cords are used to connect devices to the IEC60320-C13 power socket type. These power
cords can be used to connect devices with the AC100V and AC200V specifications.
Table 1.8 Specifications for Power Cords (for Regions Other than EMEA&I)
Usage
Used for connection be-
tween the ETERNUS DX
and the socket
(IEC60320-C13 n
IEC60320-C14)
■
Power Distribution Units (Only for Regions Other than EMEA&I)
There are four types of power distribution units. The size and number of outlets are different for each type.
Table 1.9 Required Number of Outlets and Sockets to Install Power Distribution Units
Power distribution unit
Power distribution unit (AC200-240V, 1U, 4 outlets)
Power distribution unit (AC200-240V, 2U, 12 outlets)
Power distribution unit (AC200-240V, 2U, 16 outlets)
●
Power Distribution Units (1U)
There are four outlets.
Figure 1.11 Power Distribution Units (1U)
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide
Plug type
NEMA 5-15P
Plug type
IEC60320-C14
Four outlets
Two inlets
Copyright 2014 FUJITSU LIMITED
Socket type
Cable length
(Socket)
NEMA 5-15R
3.0m
Socket type
Cable length
(Socket)
IEC60320-C13
0.5m
1.0m
1.5m
3.0m
Number of sockets
Outlets
4
12
16
28
Voltage rating/current
rating
Rating: 125V 13A
(Normal usage rating:
10A)
Voltage rating/current
rating
Rating: 250V 10A
(Normal usage rating:
8A)
Inlets
2
2
2
P3AM-7712-05ENZ0