Chapter 2
Rack Installation Specifications
2.1
Rack Installation Requirements
●
Installing 4U DEs in the Same Rack
This section describes a connection configuration in which all of the enclosures are installed in the same
rack.
The following figure shows an example when one controller enclosure and six high-density drive enclosures
(4U) are installed in a rack.
For this type of configuration, connections between enclosures can be performed with the cables that are
provided with the drive enclosures. Obtaining extra extension cables for reverse cabling is not required.
Figure 2.7 Connection Example 2 (ETERNUS DX600 S3 Connections in the Same Rack)
Cables that are supplied as standard
3.5m
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide
DE#11 (4U)
DE#01 (4U)
DE#30 (4U)
DE#20 (4U)
DE#10 (4U)
DE#00 (4U)
CE
45
Copyright 2014 FUJITSU LIMITED
P3AM-7712-05ENZ0