Reset Mode Procedures; Datatran Function Table - Sam4s ER-920 Operator's And Programming Manual

Reset Mode Procedures

Datatran Function Table

Function
Initialize EFT
Open Batch
Close Batch
Clear Current Batch
Change Batch Number
Issue Local Total
Issue Transaction
Issue Batch Status
Dial In Load
Dial Out Load
Tip Entry
Pin Pad Initialize
Close Batch with Debit
DataTran Diagnostics
Log File Report*
*The "Log File Report" records each time the "Issue Transaction" (report 506) is generated.
When the "Log File Report" reaches 20 entries, the error message "Log File Full" is
displayed when a "Issue Transaction" (report 506) is attempted. The "Log File Report"
entries clear when the "Log File Report" (report 514) is taken.
224 • Integrated Payment Appendix
Procedure
Z-Mode: Enter 500, press SUBTL
Z-Mode: Enter 501, press SUBTL
Z-Mode: Enter 502, press SUBTL
S-Mode: Enter 503, press SUBTL
Z-Mode: Enter 504, press SUBTL
Z-Mode: Enter 505, press SUBTL
Z-Mode: Enter 506, press SUBTL
Z-Mode: Enter 507, press SUBTL
Z-Mode: Enter 508, press SUBTL
Z-Mode: Enter 509, press SUBTL
Z-Mode: Enter 510, press SUBTL
Z-Mode: Enter 511, press SUBTL
Z-Mode: Enter 512, press SUBTL
Z-Mode: Enter 513, press SBTL
Z-Mode: Enter 514, press SBTL
SAM4s ER-900 Series Operator's & Programming Manual v.1.3