Control Lock - Sam4s ER-920 Operator's And Programming Manual

Control Lock

The control lock has 7 positions, accessed with 5 keys. Each ECR is shipped with two full
sets of keys.
VOID
Before performing any operations in Register Mode a clerk must be signed on. See "Direct
Sign-On" or "Coded Sign-On" on page 42 for a description of clerk operations.
Control Keys
The ER-900 includes two sets of keys that may be used to access the following control lock
positions.
Note: Keys may be removed from the control lock in the OFF or REG positions.
16 • Introduction
VOID Use to void (correct) items outside of a sale.
OFF
OFF
REG
REG
X
X
Z
Z
P
P
S
S
Key Positions Accessible
REG OFF, REG
VD VOID, OFF, REG, X
Z VOID, OFF, REG, X, Z
P VOID, OFF, REG, X, Z, P
C ALL POSITIONS
SAM4s ER-900 Series Operator's & Programming Manual v.1.3
The register is inoperable.
Use for normal registrations.
Use to read register reports.
Use to read register reports and reset totals to zero.
Use to program the register.
The S position is a hidden position reserved for
dealer access.