Connecting The Range - Maytag AER5515QA Series Service Manual

Installation Instructions
^kqfJqfm absf`b fkpq^ii^qflk fkpqor`qflkp
pqbm P J o~‹„‚ f‹‘~‰‰~‘†Œ‹
A. For safety considerations as well as optimum
performance, adjust the range so it is level and to
desired height prior to installing in cabinet opening.
Levelness may be checked by placing a spirit level or a
large pan of water on the cooktop or oven rack. Adjust the
range by tipping it forward or back and rotate the leveling
feet as required.
kŒ‘‚W A minimum clearance of 1/4² (6mm) is required
between the range and the leveling foot that will engage
the anti-tip bracket, (see figure 4).
`~’‘†Œ‹W Damage to the range may occur if range is
moved or lifted by grasping the main top, backguard or
©2004 Maytag Services
door handle. All free-standing ranges with a glass top
have a non lift-up top. Coil tops are lift-up.
B. Align the range to its designated location and prepare
to slide it back into position. Connect power cord and
plug into outlet following guidelines outlined in

connecting the range.

C. Slide range into place visually inspecting to verify that
power cord is freely routed and contained behind
range.
D. To check the range for proper installation of the anti-tip
bracket, use a flashlight and look underneath the
bottom of the range to see that one of the rear leveling
feet is engaged in the anti-tip bracket slot.
klqbW USE A MINIMUM OF (2) SCREWS TO
INSTALL ANTI-TIP BRACKET TO THE
WALL OR FLOOR.
cfdrob Q
16025644 A – 5