2.6
Expansion slot
2.6.1
Installing an expansion card to the riser card bracket
The barebone server comes with a riser card bracket. You need to remove the bracket if you
want to install PCI Express x8 expansion cards.
To install a PCI Express x8 card:
1.
Remove the chassis cover. Refer to
section 2.1 Chassis cover for details.
2.
Release the screw that secures the
expansion slot bracket.
Set aside the screw for later use.
3.
Remove the expansion slot metal
bracket.
4.
Remove the PCIe riser card.
2-16
Chapter 2: Hardware setup