Table of Contents
Advertisement
Activating a volume
If a volume is removed from one controller/computer or moved to another, the volume is
considered inactive. When you add the volume back to the system, you may reactivate the
volume.
To activate the volume:
From the Manage Volume screen, select Activate Volume, then press <Enter>.
1.
LSI Corp Config Utility
Manage Volume -- SAS2308-2
Identifier
Type
Size(GB)
Status
Task
Manage Hot Spares
Consistency Check
Activate Volume
Delete Volume
Online Capacity Expansion
Esc = Exit Menu
Enter = Select Item
2.
The below screen appears. Press <Enter> to activate a RAID volume.
LSI Corp Config Utility
Manage Volume -- SAS2308-2
This field is used to activate a RAID volume.
This field is grayed out under the following conditions:
- The volume is currently active.
- Activating the volume would exceed the maximum number of
active volumes allowsed.
- Activating the volume would exceed the maximum number of
RAID disks allowed.
- The volume has incompatible metadata on it.
Esc = Exit Menu
Enter = Select Item
ASUS RS300-H8-PS12
v7.29.00.00 (2012.11.12)
LSI
RAID 1
73
Optimal
None
F1/Shift+1 = Help
v7.29.00.00 (2012.11.12)
F1/Shift+1 = Help
Logical Volume
3000
6-31
Advertisement
Table of Contents
