Table of Contents
Advertisement
Red Hat
Enterprise Linux OS 5.x
®
To load the LSI MegaRAID controller driver when installing Red Hat
1.
Boot the system from the Red Hat
At the boot:, type linux dd then press <Enter>.
2.
- To install or upgrade in graphical mode, press the <ENTER> key.
- To install or upgrade in text mode, type: linux text <ENTER>.
- Use the function keys listed below for more information.
[F1-Main] [F2-Options] [F3-General] [F4-Kernel] [F5-Rescue]
boot: linux dd
Select Yes using the <Tab> key when asked if you have a driver disk, then press <Enter>.
3.
Do you have a driver disk?
Yes
4.
Insert the Red Hat
Write-protect the floppy disk to avoid computer virus infection.
If the Red Hat
drive into an available USB port.
7-8
®
Main Menu
No
Enterprise RAID driver disk into the USB floppy disk drive.
®
Enterprise RAID driver is stored in a USB flash drive, insert the USB flash
®
OS installation CD.
Enterprise OS:
®
Chapter 7: Driver installation
Advertisement
Table of Contents
