Expanding the volume capacity
You may use two new hard disk drives to replace the existing one, and expand the capacity of
the RAID volume.
•
The capactiy of th new hard disk drives should be 50GB larger than the existing one.
•
This function is available only when the RAID 1 volume is optimal.
To expand the capacity of the currently displayed RAID volume:
From the Manage Volume screen, select Online Capacity Expansion, then press
1.
<Enter>.
LSI Corp Config Utility
Manage Volume -- SAS2308-2
Identifier
Type
Size(GB)
Status
Task
Manage Hot Spares
Consistency Check
Activate Volume
Delete Volume
Online Capacity Expansion
Esc = Exit Menu
Enter = Select Item
2.
On the following screen, press <Enter> to proceed with the capacity expansion.
LSI Corp Config Utility
Manage Volume -- SAS2308-2
This field is used to expand the capacity of the currently displayed
RAID volume.
This field is disabled under the following conditions:
- The volume is not a RAID 1 volume.
- Firmware is configured to diable this feature.
Esc = Exit Menu
Enter = Select Item
ASUS RS300-H8-PS12
v7.29.00.00 (2012.11.12)
LSI
RAID 1
73
Optimal
None
F1/Shift+1 = Help
v7.29.00.00 (2012.11.12)
F1/Shift+1 = Help
Logical Volume
3000
6-33