Table of Contents
Advertisement
6.3
Intel
(Windows)
The Intel® Rapid Storage Technology enterprise allows you to create RAID 0, RAID 1, RAID
10 (RAID 1+0), and RAID 5 set(s) from Serial ATA hard disk drives that are connected to the
Serial ATA connectors supported by the Southbridge.
You need to manually install the Intel
Windows
To enter the Intel
system:
1.
Turn on the system to windows desktop.
Click the Intel
2.
Your storage system is configured for data protection, increased performance and optimal
data storage capacity. You can create additional volumes to further optimize your storage
system.
You can click Rescan to re-scan any attached hard disks.
6-12
®
Rapid Storage Technology enterprise
®
operating system. Please refer to the installation instructions in Chapter 6.
Rapid Storage Technology enterprise utility under Windows operating
®
Rapid Storage Technology enterprise icon to display the main menu.
®
®
Rapid Storage Technology enterprise utility on a
Chapter 6: RAID configuration
Advertisement
Table of Contents
