Table of Contents
Advertisement
6.
VGA connector (16-1 pin VGA_HDR1)
This connector supports the VGA High Dynamic-Range interface HDR1.
7.
Broadcom 10GbE controller setting (3 pin BCM10G_SW1)
This jumper allows you enable or disable the Broadcom 10Gb chip. The Broadcom 10Gb
chip is a converged controller that enables convergence of all the possible network
communications in a server such as data network. Set to pins 1-2 to enable, otherwise
set to pins 2-3 to disable the Broadcom 10Gb chip.
4-8
Chapter 4: Motherboard information
Advertisement
Table of Contents
