Table of Contents
Advertisement
3.
Place the drive tray on a flat and stable surface.
4.
Prepare your 3.5-inch Serial ATA HDDs.
5.
Get four (4) screws from the bundled set of special screws.
6.
Attach the screws at the bottom of the Serial ATA HDD that you want to install. Use a
Phillips screwdriver to secure the screws and mind the gap between the bottom of the
HDD and the head of screws.
Mind the gap between the bottom of HDD and the head of screws.
ASUS RS300-H8-PS12
2-11
Advertisement
Table of Contents
