Table of Contents
Advertisement
The Create New Volume screen shows the disks you can add to make up the RAID
6.
1 volume. Use the arrow key to select a disk, then move the cursor to the RAID Disk
column. To include this disk in the array, press <+>, <->, or <Space>.
LSI Corp Config Utility
Create New Volume -- SAS2308-2
Volume Type:
Volume Size(GB):
Slot
Device Identifier
Num
0
ATA
1
ATA
2
ATA
3
ATA
Esc = Exit Menu
SPACE/+/- = Select disk for volume
By default, the RAID Disk field shows No before volume creation. This field is grayed out
under the following conditions:
•
The disk does not meet the minimum requirements for use in a RAID volume.
•
The disk is not large enough to mirror existing data on the primary drive.
•
The disk is already part of another volume.
ASUS RS300-H8-PS12
v7.29.00.00 (2012.11.12)
WDC WD800JD-22LS1D06
WDC WD800JD-22LS1D06
WDC WD800JD-22LS1D06
WDC WD800JD-22LS1D06
F1/Shift+1 = Help
RAID 1
-------
RAID
Drive
Pred
Disk
Status
Fail
[No]
----------
No
[No]
----------
No
[No]
----------
No
[No]
----------
No
C = Create volume
Size
(GB)
74
74
74
74
6-21
Advertisement
Table of Contents
