Table of Contents
Advertisement
6.4.3
RAID 0 volume
The RAID 0 feature supports volumes with two to ten disks. You may combine an RAID 0
volume with an RAID 1 or RAID 1E/10 volume.
To create a RAID 0 volume:
Follow steps 1–4 of the section RAID 1 volume.
1.
On the Select New Volume Type screen, use the arrow keys to select Create RAID 0
2.
Volume, then press <Enter>.
LSI Corp Config Utility
Select New Volume Type -- SAS2308-2
Create RAID 1 Volume
Create RAID 1E/10 Volume
Create RAID 0 Volume
Esc = Exit Menu
Enter = Choose volume type to create
The Create New Volume screen shows the disks you can add to make up the RAID
3.
0 volume. Use the arrow key to select a disk, then move the cursor to the RAID Disk
column. To include this disk in the array, press <+>, <->, or <Space>.
LSI Corp Config Utility
Create New Volume -- SAS2308-2
Volume Type:
Volume Size(GB):
Slot Device Identifier
Num
0
ATA
1
ATA
2
ATA
3
ATA
Esc = Exit Menu
SPACE/+/- = Select disk for volume
ASUS RS300-H8-PS12
F1/Shift+1 = Help
WDC WD800JD-22LS1D06
WDC WD800JD-22LS1D06
WDC WD800JD-22LS1D06
WDC WD800JD-22LS1D06
F1/Shift+1 = Help
v7.29.00.00 (2012.11.12)
Create a RAID 1 volume
consisting of 2 disks plus up to 2
optional hot spares. ALL DATA on
volume disks will be DELETED!
Create a RAID 1E or RAID 10 volume
consisting of 3 to 10 disks
including up to 2 optional hot
spares. ALL DATA on volume disks
will be DELETED!
Create a RAID 0 volume consisting
of 2 to 10 disks. ALL DATA on
volume disks will be DELETED!
v7.29.00.00 (2012.11.12)
RAID 0
-------
RAID
Drive
Disk
Status
[No]
---------- No
[No]
---------- No
[No]
---------- No
[No]
---------- No
C = Create volume
Pred
Size
Fail
(GB)
74
74
74
74
6-25
Advertisement
Table of Contents
