Table of Contents
Advertisement
2.5
Expansion slot
2.5.1
Installing an expansion card to the riser card bracket
The barebone server comes with a riser card bracket. You need to remove the bracket if you
want to install PCI Express x8 or x16 expansion cards.
To install a PCI Express x8 or x16 card:
1.
Firmly hold the riser card bracket,
then pull it up to detach it from
the PCI Express x16 slot on the
motherboard.
2.
Place the riser card bracket on a flat
and stable surface, then remove the
screw from the slot bay.
3.
Install a PCI Express x8 or x16 card
to the bracket as shown, then secure
the card with a screw.
4.
Repeat the previous steps to install another PCI Express x8 or x16 card if needed.
2-12
Chapter 2: Hardware Information
Advertisement
Table of Contents
